Will look them up. Thanks

just got the S3 landy MOT'd after six months of hard work. this though has got me anoyed i have a couple of oil leaks - nothing new there. except the main one is from the lift pump coming from inside and dripping off the handle. this is a new (brit) part with less than a thousand miles. there...

cheers folks am happy and enjoying myself . i have a couple of oil leaks main one from the lift pump coming from inside and dripping off the handle. this is a new part less than a thousand miles. there cheap as chips (???) but would like to by a good one from somewhere. but other than that all i...

well after 8 months of hard graft outside on the street in the rain and more f"£$%ing rain fending off well wishers with good intentions and clean hands ripping rusty off my S3 and putting new and shiney on, before sending to it off to richards for a new chassis (thanks and big up to Paul there)...

well after 8 months of hard graft outside on the street in rain and more f"£$%ing rain fending off well wishers with good intentions and clean hands ripping rusty off my S3 and putting new and shiney on, before sending to it off to richards for a new chassis (thanks and big up to Paul there) it...

OFF EBAY copy and paste this below into your ebay account and it should come up. note it did not come with the fuses 12 Way Blade Fuse Box / Bus Bar - Marine Kit Car Boat HGV 12V 24V

if your doing it yourself take a look at a paint called Tekaloid sold by Smith & Allan it is a coach gloss paint made specifically to go on by brush or you could use a sprayer. it takes a while to set but applied properly takes a lifetime to fall off...

sorted. the reply from kwakerman got me thinking. looked at the inner of the bearing and it wasnt quite true. its pressed steel formed by what must be a badly worn punch so slightly smaller at one end, so not having a lathe (i wish) i took a high tech tool called a dremel (when needs must and...

when i got my landy it had been re-wired using red blue and black wire any of which was live or earth. having spent an age trying to sort it as nowt worked, i bought a buzz bar fusebox. so now everything that sparked now goes on the live side and the earth on the earth side. now everything works...

thanks for your replies will try some very fine emery on the steering column and try and tap down it slowly. as this is the only bearing for the job so sumats not right eh! the bearing its self is a bit rough and this is the second one i'v got you would think they would get it right...

land rover series 3 RTC324 - Steering column top bearing does not fit. steering column 22.5mm o/s diamerter RTC324 - Steering column top bearing is 22mm i/n diameter is there a bearing for an after market steering column ? my landy is off soon for mot. how did you make yours fit? cheers folks

can i use a rear stub axle from a later model land rover on my series 3? as mine need to be replaced because the land is not replaceable, and would like a more affordable/repairable option in the future if possible. cheers

can i use a rear stub axle from a later model land rover on my series 3? as mine need to be replaced because the land is not replaceable, and would like a more affordable/repairable option in the future if possible. cheers

sun,rain,sleet,snow,mud,more mud,breakdowns, oil, more oil, unc,unf,af, and no bloody heating. series 3 honestly whats not to enjoy!

hi folks yesterday i fininshed rebuilding both axles with new para springs and installed them in preparation for my new chassis next month. "tick that one" now having given up trying to keep all the oil in where it should be - there lies the path to maddness i think - i would like some tips on...

Has anyone got any information on these karsons mr749 brake drums( 591039)for a 88"series 3 got em off ebay are they good-bad-ugly?

thanks its good to know i am not the only one with a tool box. still trying to work how the site works never done this before. i spent yesterday in the sunshine! putting one rebuilt swivel housing back on and taking the other off with half shaft so i could spend sunday in the shed - (modifying...

i have been fixing land rovers for the last ten years, mostly my mates series two as he will not buy new parts for any job. still the experience has come in handy! cheers mate.:D got me a series 3 and building it from the ground up ready for a new chassis in august. this is not helped by new...

have just took delivery of to new britpart stub axles - only to find the front wheel bearing will not fit on the axle, as the axle is .3mm bigger (on both axles) than the internals on the bearing. its not much if you have a hammer? and you dont give a sh## about the bearing splitting or you...