1. I

    Ignition key not 'returning'

    It's the electrical block on the back of the barrel. Needs replacing.
  2. I

    Another Ebay 'darling'. Legit or blatant ringer?

    Just looked on Wikipedia, Land Rover 90 came out in 1983 and finished 2015. So Y reg-A reg was the start reg.
  3. I

    Bulkhead mount battery connector?

    They don't. There is a male and female connector. I think you have the male, can't see because you have the cover on.
  4. I

    Rear pads not clearing rust of brake discs

    If you say so.
  5. I

    Rear pads not clearing rust of brake discs

    Well that's a new one.:confused:
  6. I

    Defender Stolen Sheffield City Centre Late 6th Jan / Early 7th Jan

    I used to do vehicle recovery, so i have an idea what you can do. Go to the police and ask them where the vehicle has been taken and ask to see it, simple as that. If you want it back if it is written off, then talk to your insurance about buying it back. Me and the missus bought our car back...
  7. I

    Welders in Warwickshire?

    So you bought your self a Disco? So now you need to buy your self a welder. Discos are prone to rotting so do your self a favour, buy a 150amp mig welder and learn to weld, it will save you cash in the long run.;)
  8. I

    90 rebuild and striping the donor vehicle

    +1
  9. I

    P38s in the snow

    Love it some more and stick antifreeze in it.
  10. I

    Its Now or Never. Last Editions announced

    I want the winning lottery numbers first.
  11. I

    Aaron's 90 rebuild (Round 2)

    Have you got a Citizens Advice Bureau near you. They will tell you your rights and you won't have to pay them for their service.
  12. I

    what year did the rear number plate change sides?

    Fog light rules was 1981
  13. I

    Lacking power

    Nice one.
  14. I

    Lacking power

    How's it running now?
  15. I

    Lacking power

    You can adjust it through the hole it the timing cover.
  16. I

    Lacking power

    Leave the belt on. If you think it's back to normal; then leave the pump adjustment alone. But if you do want to adjust the pump; then try it clock wise first and if the power drops of turn it back again. I'm really surprised that it ran at all with the timing as far out as you said it was,but...
  17. I

    Lacking power

    The injector pump timing might still be a few degrees out. Really you need a dial gauge to sort it but it can be "tuned" by ear. You don't take the belt off you'll be happy about that. Looking at your pump sprocket, there are 3 bolts, slacken them, don't take them out. The large nut in the...
  18. I

    Lacking power

    This is the only information I have got, so, the woodruf key points straight up, there is a pointer on the timing chest for it. You peg the injector pump and you line the cam with the pointer in the picture. When you have set the timing, turn the engine 2 full turns with a socket and bar and...
  19. I

    Lacking power

    The pump sprocket should have a hole through it for the locking peg and the cam sprocket has a line in the edge of it, which goes at about the 7o'clock position. Between the cam and injector sprockets towards the bottom is a hole with a mark pointing at the cam. Hope this helps.
  20. I

    Lacking power

    Take your time setting it and good luck.