Hi Jason, Can't remember the tyre size and its on the farm at the moment, but they were replaced by 18" wheels and tyres so it will be fine as a spare, I carry one as a spare in mine now. I will check the tyre size of my spare tomorrow and come back to you. David

Jason I have a spare 16" wheel with a very good tyre, perhaps a small donation to the forum, I am near Kenilworth, I note you are in Warwickshire. All the best David

The diagram is very useful, I was about to get some height blocks made, but I will give this a try first. thanks

I have just fitted my updated Rf unit, Obviously I can't comment on battery drain issues, but I can confirm that I used to have be with 2 metres of the car for it to unlock/lock, but using the same key I can now be over 10 metres away, what a difference.

:hysterically_laughi:hysterically_laughi

I am assuming your car is diesel, if it's 95/96 then should be EDC, if it's late 96 to 02 then it should be EDC advanced. I think, but happy to be corrected.

I only mentioned the edc situation is because that is what I did, mine is a 96 and was showing edc advanced, me knowing better changed it to edc, plus a couple of other changes, then it wouldn't start, just turned over, reversed each change one by one until it started, it was the edc setting...

Sounds like yours has been disconnected, it is located in the right hand side of the boot under the hard plastic part where the rear seat catch is located, I removed the top trim and could see mine is the original version, I disconnected it and then the remote wouldn't operate the locks, plugged...

Charge battery before anything Bearing in mind you said you pressed a load of buttons, it might be worth checking in the Becm/settings/options/engine - that it is set to the correct edc or edc advanced, what year is your car.

I can't disagree with you Wammers (look I spelt it right), I would have thought they should have been more like £50 to £60, but as no one seems to have been able to replicate them, its LR or nothing. I have just ordered mine, and I am paying £195 plus vat as I need it now, but thought to ask...

Hi all I have just listed a group buy for the P38 Rf receiver if anyone is interested, please note I am not selling these, I have just tried to get the best price I could. http://www.landyzone.co.uk/lz/f62/p38-range-rover-updated-rf-receiver-group-buy-274958.html#post3358131

Hi all Having had such great help with my late fathers P38, I thought I might try and put something back. I have negotiated a group buy of the P38 Rf receiver, I need a minimum of 5 orders at £220.00 each including VAT and UK mainland postage, that's £183.33 plus VAT. Supply is from a...

Just off to get my eyes tested, byeee

Wammers Thanks for editing my stupid error Can should be can't, hours of fun for someone having read that post!! I have edited my post accordingly

Have a look here, search is your friend http://www.landyzone.co.uk/lz/f10/p38-alarm-fault-message-48058.html

What if any fault codes is the nano com reporting?

PS I used a cut down Iphone 4 (4s) screen protector on the Nanocom screen for a bit of peace of mind, fitted spot on.

Thanks for the information about the little flap, i used a little WD40 in the ignition lack and it cured both the "key in Ignition" message and meant I didn't have to jiggle the key in the lock before starting. 1 issue down several to go.

Hi Ian Funnily enough I received my Nanocom today also, the instructions should be a single sheet of paper listing the setup procedure at the bottom of the box. The link to that page is here http://www.nanocom-diagnostics.com/uploads/downloads/Quick%20Setup%20Guide%20V1.25.pdf The first...

and the p38