Yes i have also been posting on the Disco3Club site but not getting many replies but looking at the post you sent me it is disco3.co.uk is this a different site to the disco3club site if it is i will join the disco3.co.uk site and post on there. Thank you Ron

Thank you gstuart That is great help I think i should get the memory ecu so it will work , But thank you for your quick reply i am now searching for the memory ecu as regards as the heated side of it one of the posts you sent me shows how to wire from the HEVAC down to the footwell have not had...

Hi gstuart That is some great info the replacement seats are in my garage at the moment and i am upstairs on my pc so will have to go and check on the drivers seat for those 1,2,3 buttons! But to be honest i am no that bothered about them being memory or not just as long as they work that would...

There are buttons on the side of each seat is that what you mean by the switch pack ?

What do you mean switch pack? and memory buttons ? where would thay be ? I have googled the seat memory ecu and it looks like there are many different models ? I did not know about this memory ecu surely they should not have removed this from the drivers seat as it is part of the seat ? I will...

When i connect my Lynx diagnostics i have seen one of the programmes that lets you go into the seat memory setup so would assume that the memory is in my ecu. But all those plugs and the memory plug where do i connect them ?

Hi gstuart My replacement electric seats arrived today and when i checked them i was shocked to see a lot of connector plugs under the drivers seat ? I thought it would just be the big black connector to plug in but apparently not so , the passengers side just has the one big black multi plug...

Hi All To get heated seats working i need to get the connection from the back of the HEVAC and it's connecting wire down to the footwell. I have ordered some replacement heated seats but i will need that connection from the back of the HEVAC to get them working does any one know where i can get...

I have the Lynx diagnostics it covers all the discovery range and can add different models at a cost it can remove faults calibrate suspension and other stuff just need to learn more with it .

Well i did some tests this morning and although the plug under the seats looks the same i could not get them to warm up so i do not think the pads are in the seats (bummer) Any way gstuart you said you retro fitted electric seats in yours now did you have to do any mods to fit them or do they...

By the way like the steering wheel i have fitted the one with the cruise control and radio buttons and phone but from a sport D3 but yours looks much nicer , may look into that at a later date.

Thank you gstuart I have just been looking at that link you added for me and if you look at the pictures where he connects the charger the plug has the exact same connections as mine pink on one row then blue above pink on second row then yellow next to blue then a gap then yellow . that is...

Yes that does help. I will have a look tomorrow hopefully they have as i said why would it have four wires if they were not there ? my D2 has non electric seats but still has heated seats. I will disconnect battery for 30mins in the morning and separate that plug under the seat again and follow...

Hi gstuart Thank you for your input, Yes it is a base D3 but i understand what you say. here is a picture from under the drivers seat and as you can see there are four plugs and four wires going into the seat. So i would think that two go to the air bags and the other two are for the heated...

Thank Doo I will first try to locate the missing plug on the back of the HVAC first before i go ahead with stripping off the seat covers.

Hi Doo Was that just for the one seat ? if it was does that stop them all from working ? And looking at your repair did you just strip back the outer casing then solder together the inner element then cover with a plastic sleeve ?

Thank you marjon Does that look better ?

Sorry to be a pest marjon but how do i edit this post title just cant see how to do it?

Ok thank you marjon I will see if i can edit my title I did have a good look when i changed the HVAC control panel even tried to follow the loom along as far as i could with my hands and fingers as much as i could but could not see or feel any extra plugs!! I will probably drop down the...

Hi all Also just thought i would mention their are lights around the dials of the heated seat buttons should these light up ? And is this because the forth plug connection is missing ? I do have the Lynx evo for the Discovery range but unfortunately i am not 100% ok with using it yet.