Hi guys ! Yeah, issue maybe you can help me with - bought a set of original old Freelander 1 rims secondhand for my 2995 Freelander 1 Facelift. However, the rims hit the brake calipers which go over the brake discs on the front. (The back wheels have brake drums, so no calipers.) What should i do - get spacers ? Which size would one recommend, or should i forget it altogether, yours greatfully, arnodafe72 cheers ! 🍷😏
 
As above. The offset of post 2001 rims was changed to accommodate the larger brakes fitted to the later models.
As suggested, it's best to get the correct rims. A 5mm spacer should move the rims out enough to clear the brakes, but the studs aren't really long enough to allow correct engagement of the nuts, so longer studs are needed.
It's far better to save all the messing about, and simply buy the correct rims to suit the age of the vehicle.
 
As above. The offset of post 2001 rims was changed to accommodate the larger brakes fitted to the later models.
As suggested, it's best to get the correct rims. A 5mm spacer should move the rims out enough to clear the brakes, but the studs aren't really long enough to allow correct engagement of the nuts, so longer studs are needed.
It's far better to save all the messing about, and simply buy the correct rims to suit the age of the vehicle.
Thanks again @Nodge68 - yeah, just picked up 5mm spacers from the tire shop. They said anything bigger than 5mm you have to change the studs......is it absolute that the studs aren't adequate ? Regards, as always, arnodafe72 🍷😏
 
Thanks again @Nodge68 - yeah, just picked up 5mm spacers from the tire shop. They said anything bigger than 5mm you have to change the studs......is it absolute that the studs aren't adequate ? Regards, as always, arnodafe72 🍷😏
I had 5mm spacers for the same issue but wasn't happy with them and replaced the rims.
With the way tyre fitters and mechanics hammer in the wheel nuts you need every mm of thread to keep you and your family safe.
The other issue with spacers is it means the centre hub is not seated correctly so adds even more pressure on the studs.
 
I had 5mm spacers for the same issue but wasn't happy with them and replaced the rims.
With the way tyre fitters and mechanics hammer in the wheel nuts you need every mm of thread to keep you and your family safe.
The other issue with spacers is it means the centre hub is not seated correctly so adds even more pressure on the studs.
Ok, cheers man ! Makes you wonder why anyone uses them.....
 
Thanks again @Nodge68 - yeah, just picked up 5mm spacers from the tire shop. They said anything bigger than 5mm you have to change the studs......is it absolute that the studs aren't adequate ? Regards, as always, arnodafe72 🍷😏
On an M12 X 1.5 thread, it needs 15mm of thread engagement to achieve maximum clamping load capacity. You'll find that with spacers, you probably have about 12mm of thread engagement, which isn't really enough.
 

Similar threads