Mark Piercy

Well fumbled member....
Full Member
So, apart from being a bit fed up at the moment the number one injector copper seal has gone🤯
I had a split return pipe that exopsed air passing beside the injector... Can I hell find any over here🤬
Anyone have a good supplier to suggest please before she gets contaminated with the black death sludge 😊
 
So, apart from being a bit fed up at the moment the number one injector copper seal has gone🤯
I had a split return pipe that exopsed air passing beside the injector... Can I hell find any over here🤬
Anyone have a good supplier to suggest please before she gets contaminated with the black death sludge 😊
didn't Flossie source some. I know he was after them a while back
 
I've managed to find some on Amazon fr, 21mm od x 17mm id x 1mm..
12€ with delivery... I guess I'll find out one way or another.. I just hope the seal seat isn't scored or damaged.
I'm seeing more and more car parts for various older vehicles not available anymore... Are we being pushed off the road🤔 thank you rubbers👍
 
I've managed to find some on Amazon fr, 21mm od x 17mm id x 1mm..
12€ with delivery... I guess I'll find out one way or another.. I just hope the seal seat isn't scored or damaged.
I'm seeing more and more car parts for various older vehicles not available anymore... Are we being pushed off the road🤔 thank you rubbers👍
Of course the politico's want us all off the road, sat at home tied to a bloody smart phone. BEV's are deemed OK as they can be disabled remotely at any time. Control and compliance.
 
There is an ebay seller who does a set of six but they are rubbish as I found out, changed number 1 injector seal twice with them with no luck. I got 5 injectors off ebay and chucked them in a sonic cleaner and fitted one of those in place of the leaky number 1 and that's sort of cured it, still looks a bit damp down there but it's better than it flooding out like before. Head seat was perfect. You can get the old washers off if you are careful but they don't come off completely undamaged, I didn't keep it unfortunately so it might have been reusable with a bit of annealing.
 
17x19.5x1 they are much smaller OD than the originals, I put a pic up on here somewhere, ID is larger than originals, difficult to get them on the injector if they were the same as original I suppose. I don't know if the od or the id was the reason for their utter crapiness or both.
 
Land Rover told me they weren't replacable. Best clean up the seat and washer and hope it works.

If you can get it off (I couldn't as it was smaller than the shaft) then heat to cherry red and then put it back on the injector and put back when cool.
 

Similar threads