Sorted bit the bullet and got a carden front prop from gwyn lewis- nice already phased and balanced in that position, grease point on slider aswell- vibs all gone, should have done it straight away!:D Got a couple of nearly new wide angle props if anybodys intrested.

Had a few hours to spare today- found app which seems to help if you have'nt got an inclinometer, swaterlevel www.QOOAPPS.com- gives a decimal readout of flange angles, not mega accurate I imagine but it appears to be in the ball park. Anyhow front flanges about 5 degrees out & rear slightly...

Fookin ell, is there an app for that!

Thanks again Good site, will digest info and have a think. I,ll chase up max angle from maker, Prop flanges were almost parallel to each other when giving bad vibs, i've pulled the diff nose back up making the flanges more out of parallel and vibs reduced!but i can see where your coming from and...

thanks Benkenobi prop isn't overcompressed,prop is in alignment-yokes and arrows,prop angle is around 25 degrees from horizontal- 190mm drop from trans box flange. Pls explain line one of your post- are you refering to flange out of parallel tolerances?

Update: been running without rear prop- all was good- took the plunge and went for a double carden on the rear, she vibrates again!:(. Took out the rear trailer arm spacers and its got a lot better, trans box to rear diff flanges not in parallel but i,m getting close to smooth 4 wheel drive...

Hi all would like to say thanks to all the forum contributers, used the forums to rectify a bad vib on my def 90 300tdi after fitting a 2inch lift. In short I had a new rear wide angle prop prior to the lift, which was working fine, post lift had bad vibs through body and steering wheel. found...