Usual and best place to connect in your landy is in the right rear under the cover there. And what ever you do do not use those devils inventions "scotch blocks" to link in.

Very few require a spacer. A small number of bellhouses were machined incorrectly (too much material removed), not wanting to scrap them LR decided to add a shim (to make up the deficit). In true LR style no identification was stamped on the...

Carry on with your old type bodge method if you must, but better modern methods are available today as noted by myself and others on this forum.

Thanks folks, appreciate the welcome, meet the Wolf, picture attached :)

Yes, I can thoroughly understand why you would think that. There were times during my communications with Jake when I myself thought this is only about £50. Whilst it took a week for him to respond to my messages once he did start replying...

Having resolved my issue, secured a refund, and avoided legal action, I can now share my experience. Outlined below is a summary of the facts and that is all I'll leave you to draw your own conclusions. On 6th February, I ordered a Marshall...

I think you should be fine with any 300tdi intercooler, I believe they are all the same. However I am not an expert in correct, I am more along the lines of what works, I have an aftermarket 300tdi intercooler fitted to my 200tdi engine. The only...

Model and year may be helpful.

exactly like in the picture

Sounds like the type fitted to 1980 and on Series and 83-85 Coil spring models.

Hello Kiwiwolf, Welcome to the forum. Pretty sure you are correct on fan removal. However I swapped mines [ 1990 truck] out for electric some thirty years ago.

Early 80's models had the previous Series model lift up recess type handle's. Swapping the whole door for later "car" type handle with wind up windows may be an answer. Or is it you just want a better locking system? There are ways to fit...

Yes it is looking like the best option.

Given the chassis is already shortened you would likely have to fabricate brackets for both.

That is a vain way to justify it. Many of us go to the effort of ensuring our vehicles are not illegal. In this case, wider wheel arches or even attaching some rubber to extend the factory ones is cheap and easy to do. Its just laziness not to do...

Heavy duty 25mm rear anti roll bars are available.

If body roll is bad, an anti-roll bar might suit better in addressing this issue. There are a few air shocks about: https://gabriel.com/HiJackers I've read up on them and reviews seem mixed, some people seem to find them fail quickly, others...

Tottot, Appreciate the quick response and yes my bad on the spelling.. I know better. Yes, a little premature as we just noticed on the other set. You helped confirm my dilemma. Thank you!!

Having the springs fitted correctly makes a big difference to whether the brakes work well or not. When my son bought his Ninety they were fitted incorrectly.

Its Brake not break [as in broken] Only the front "leading" Brake shoe has the pin that engages with the adjuster cam, it is also the place where the return spring hooks on behind the snail cam other end on the backplate. Rear brake shoe only...

I can understand those Insa turbos chunky's making a racket on the arms. For the sort of stuff you are doing as @300bhp/ton says spacers or offset rims would be fine. Bearing strain tends to be more of an issue when very wide wheel/tire...

Issues with spacers are your tire can end to far out for the eyebrow to cover, a legal requirement in the UK. Greater stress on the wheel bearings, just something to be aware of and keep an eye on. Be aware it is not good to hold steering at the...

Before messing with the steering box do as @Dippypud notes above. Those steering shaft UJ's look rough and it is likely other joints in the system not good. Also check that steering rods are straight and not binding with anything. From Your pic...

Turns out the replacement motor was faulty! I obtained a new new one and all is good (apart from the many hours wasted trying to sort out what was wrong!!!). Thanks anyway.

Spot on gents. Broken cable about 3 inches from the start. 4 hours start to finish included driving to the shop to get a new one.

Tip, When the roller in the striker is worn it hinders closing.

Have a look at "Loctite" website as to how their compounds work. There are even ones that can add to a metal surface. Removal is usually application of heat locally, in the case of a crank pully a blast on the end away from the seal. Also...

Discovered on another forum that its a bypass valve from a London taxi, used in loads of kit cars and conversions as it's a simple option. It's a 3.5 Efi with RR auto box . Yep, fun going forwards but not so much fun stopping. Series single...

Driving home on a nice sunny afternoon. I was almost at my drive entrance when I saw something on the road ahead Looked like a wiper and arm Land Rover size. OH you got it, mine.😊 Tip when doing yours lube the spindle axles where they enter the...

Reminds me of a rare occasion I took landy to work 80 miles in the rain... squeak squeak squeak from the wipers.... then on the A road all of a sudden peace and quiet..... ahhhhhh bliss... then the reality that the silence was due to the drivers...