Yer bin sniffing round the freelander section. Finking of buying one? Yer know it makes sense rodney. @landowner confirm.

I love the optimistic note of closing the poll in 2035!!!

Oh yea? https://www.landyzone.co.uk/land-rover/freelander-faults-poll.54179/

Im surprized you can get yer jumpers on with the size of yer nose.....

Haha...nope its left a mental scar 🤣 🤣

Did the therapy afterwards work?

Ive watched vids of lads doing epoxy floors they look too good to drive on 🤣 🤣

Come to think of it ive got proper garage floor paint in the shed somewhere, you wont believe this but I got 100 odd lts free 🤣🤣 I did sell some & gave some away to my mates I'll have a look & see whats in my paint store. 🤣🤣

Is yer clock stuck at 12 🤣 🤣

More like marbles bloody size of them, It was good to watch them in the sunshine

I took pallets of jotun paint off the ship, choice of colours...yellow,green,blue,white orange& red. We use loads of paint in the yard to make non slip we add sand. You need to keep stirring the tin as the sand falls to the bottom of the tin. ;)

Not to bad then good job it's not a FL would have been scrapping it 😃

Me Tratter is MIA. Latest opinion is it's just the head gasket, the head has gone oft for checking and skimming. Fingers crossed (and anything else that will perform the same trick). #missmetratter

Painted mine with a 2 part Jotun paint, it’s not non slip but it’s pretty resistant to oils and such. It gets slippy though so need to mop up spills. J

Been hearing Cuckoos for a few days now. J

Re the doghouse. Did she cook your dins on the seduction hob and discover what a pain they are to use...... and clean up after??;)

Have to admit that garage floor paint is one of the best things I ever did. It was a bit of a Kev as my neighbour had a lot left over so he gave it to me. My present garage doesn't have it so I put down cardboard and old carpet!! ;)

As above its not just a matter of pushing it in its more like a gear Change !!

I have found you need to be quite slow when putting the Od in and out of gear. Keep us informed how you get on with fitting a solenoid.

Before you think it's wrong pads, check the calipers are working properly and not seized

Rears; 302mm diameter Thickness new 12mm Thickness at service limit 10mm Max runout 0.08mm

Nah, I'll help a Cantabrian to pay for his kids school shoes rather than give money to a Chinese iron works. I should think the rears do a lot less work than the fronts and will last a long time anyway. Anyone know the original and minimum...

Give it a new set of disks too, yer tight git!

We had are first Hoopoe arrive yesterday was still about this morning but still not heard a Cuckoo yet 😯😯

I think you can get a non slip epoxy for floors with spillage would be good You pay the money for new not damaged !!

Chinese tariffs ?

All good so far. Nothing at all to report over 6000 miles.... so I'm going to take that as a win! I kept my old LR hubs, so if you want to buy Timken bearings you can have my hubs and press the new bearings together before you start if you...

How are the Eurospares bearing going after a year ? I'm getting a rumble on mine about 60-65mph, mainly from the seat & floor, but not through the steering wheel. Feels like either rear wheels need balancing, or the bearings on their way out...

Finished the other side of the car just now.... Apart and back together in just over 2 hours. It's soooo much easier when the rusted bolts play ball!! Still going to replace all the bolts with new, the ones holding the mud shield on were just...

Got nearly one side done today..... At 159,000 miles and 27 years the hub assembly bolts, the rear caliper bolts, and the rear mud shield bolts had rusted solid. Heat and hammering got them all off, but I've mangled some of the heads, so I'm...