Asking again, did you hear from Rob? I, in your situation, would try and see if you can find at least one Disco1 or early Disco2 light and see if you can make it fit. You'd maybe have to fab up or obtain light surround etc, but if it gets you a...
Morning All. :D
A damp day so far with a light misty rain.
I have nadgered meself somehow. Right knee, left arm and my neck...all sore. I hate getting old, but it is still better than the alternative. ;)
Have a great day!
So shop keepers have to change the way thay do thing's to accommodate shop lifters ( thieves ) !! Could not make that up , but good shoes are expensive now so the police are cutting back on the amount of re-soleing thay do
It's possibly the heat causing the flare up. Happens with me.
Glad it's cooled down, no idea how it's the back of 3. Did the usual adult stuff and then made some jam. ๐ Now watching shinty and wondering did I accidentally play shiny instead of...
You do get complacent when you have water on tap, we spent 5k on drilling 10yrs ago but no luck ,the veggies just get enough to keep them going till the next rain August is supposed to be a wet month for us but not so far Thursday is forcast...
Its v hot here at mo. but we had a wet winter and the well's held out amazingly this year. Its on a timer so it runs at the same time every day and there's a level control so that the pump can't run dry, which ever turns it off first.
In the...
Maybe? how could I tell? It's only attached to the brake booster via a pin and clip style connection, and the brake booster is bolted on.
The hand brake used to do one click hence I think 3 may be too much, maybe the space could be the unused...
Thanks.๐ Problem is it's through the clear coat and the paint layers. You'd think it had sat for years rather than a veh that is rinsed, washed, polished, resin'd regularly ๐She's going in for a little bit of body work maintenance around...
Well guys just put a new duckbill and non return valve in primed and still hard to start, after it's been running it will start strait away but if you leave it 10 minutes it starts but rough for a couple of seconds, have you got any other ideas...
OK just checked the fuel lines, no leaking all dry none are rubbing or kinked.
I'm running out of options now, I have ordered new genuine seals and washers for the injectors and will redo these just in case I made a cockup the last time and a...
The thing is though it drove faultlessly for a week after the galv chassis was fitted, but I will go out now and give the pipes at the tank and crossmember an other check and report back cheers for the help.
Itโs a difficult one eh. Paint them and it comes off with socket. Coat them with something and it washes off in the wet. Iโve gave them a coat of Vaseline before and it lasts a bit, but it needs redoing regularly.