• Stanleysteamer
    Stanleysteamer reacted to MJI's post in the thread ACE system pipe corrosion with Like Like.
    BTW my repairs worked out slightly cheaper than a delete kit EXCEPT I bought a brand new rear ARB because it was cheap, rude not to.
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to meego's post in the thread ACE system pipe corrosion with Like Like.
    I’ve been saying this for years. I simply can’t understand why people are advised to throw money away on maintaining or repairing ACE, when there is a cheap and very proficient work around. ACE is a very good system, but this or standard ARB’s...
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread Disco 2 cruise control not working.
    Just a bit of a side issue.... Knowing how small and overpopulated Malta is, I a wondering what you need it for. I use mine on motorways mostly for comfort's sake, and N roads, (the equivalent of A roads) to avoid getting tickets, and...
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Sieklo's post in the thread Disco 2 Disco TD5 accelerator pedal strange behavior with Like Like.
    Still on Auto ECU, just change settings in Nanocom from auto to manual but that’s in BCU as far as I know. Okay I will record it next time I drive. Thanks a lot. Okay will check it, thanks a lot. Okay first I will check via Nanocom voltages...
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to lynall's post in the thread Disco 2 Disco TD5 accelerator pedal strange behavior with Like Like.
    2001 TD5 I had years ago, the throttle pedal tracks wore out on one side. New to me 2nd hand pedal assy sorted it.
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to landowner's post in the thread Getting Gwen the Mini to Run. with Like Like.
    Sounds like a plan, either small file and file a tiny flat middle of needle or you can use Brasso to remove tiny amounts off till you get an improvement, could be lean at top end though and rich lower down, that would give black plugs if you're...
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread Getting Gwen the Mini to Run..
    WHY!!!!???? Simply weaken the mixture at the jet, by winding the jet up a lickle bit?? Going back to a needle that didn't work in the first place won't help, and filing anything off anywhere will simply richen the mixture at that point...
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to DanClarke's post in the thread Getting Gwen the Mini to Run. with Like Like.
    But the switch to BP5ES plugs has not resolved the sooting up problem. Which means it is probably running too rich for them too.
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to landowner's post in the thread Getting Gwen the Mini to Run. with Like Like.
    It's not the plugs, it's either burning oil or tooooo rich
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Wimblowdriver's post in the thread I would just like to say with Like Like.
    Yea, I'm still looking at the grass from above 😁
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Def90man's post in the thread I would just like to say with Haha Haha.
    Is that cos he’s deaded?
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Wimblowdriver's post in the thread I would just like to say with Haha Haha.
    Plant pots is ideal for weeds to grow. Only way to deal with them is to pull them out when they appear. (In my opinion of course, I ain't Percy Thrower).
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to landowner's post in the thread I would just like to say with Like Like.
    Mornin Warm but dull for now Had to put canes up as sunflowers are now at about 3 feet and I expect em to get much higher. Putting some steak in slow cooker for tonight Stay cool all :)
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    You can get all sorts of weed preventing materials some of which come in circles with a slot cut in to go around your plants. W uses them for the strawbs in her raised beds. They have copper woven into them...
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to landowner's post in the thread I would just like to say with Like Like.
    Friend of mine used to use carpet underlay, think the stones idea was to keep snails off but different people give different answers :)
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to DanClarke's post in the thread I would just like to say with Sad Sad.
    Morning All. :D A pretty rubbish night. Hosp called at 1:39 to say the old gal was fading again. :( A lovely day here. :) Have a good day. :D
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Hippo's post in the thread I would just like to say with Like Like.
    Wot does we fink about mulch for covering soil in me plants pots? Is small stones a betterer option to stop weeds growing in em.
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Stone56's post in the thread I would just like to say with Like Like.
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Hippo's post in the thread I would just like to say with Like Like.
    Launch ov stage 2 ov freelander development included seats and suspension.
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to DanClarke's post in the thread I would just like to say with Like Like.
    OK, the old gal has rallied a bit, still very much "on the edge" but we will see what happens overnight. Wife is expecting a similar scenario tomorrow. :(
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to DanClarke's post in the thread I would just like to say with Sad Sad.
    Wife is there with the MIL, as are 2 grandchildren. Her Son (who was told first) had not yet put in an appearance. :( He is closer to the hospital than we are , so I am baffled.
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to DanClarke's post in the thread I would just like to say with Sad Sad.
    ... that the wife just got a call from the hospital. Her Mum (who they gave a GA to yesterday to work on her leg) is now today going downhill fast and she had better get there ASAP. Not looking good at all.
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread MAF sensor issue.
    If it will run on MAF cleaner. or eazistart type stuff, then I don't think it can be electrics other than those that run the fuel supply/injection system and timing. But that does involve battery poswer while cranking. I say again, get it on a...
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to cr4x4's post in the thread MAF sensor issue with Like Like.
    I didn't even get the jump leads off before she shut off. realized now that the soot was in fact oil and think it's coming from the crankcase breather. I'll see if I can track down a nanocom to see what she says. thanks for the advice. im...
    Jun 18, 2025
  • Stanleysteamer
    Stanleysteamer reacted to saxavordian's post in the thread I would just like to say with Like Like.
    How to frighten your children.
    Jun 17, 2025
  • Stanleysteamer
    Stanleysteamer reacted to landowner's post in the thread I would just like to say with Like Like.
    Mornin Lovely sunny morning Making something to change oil in power steering today, two bottles, some tube etc Off to water plants before it gets too warm Stay cool all :)
    Jun 17, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread MAF sensor issue.
    Could simply be a batt with enough power to turn it over but not enough to fire the injectors. did it run until you disconnected the jump leads? or did it stall out while still connected? Have you stuck a diagnostic on it? Welcome to the...
    Jun 17, 2025
  • Stanleysteamer
    Stanleysteamer reacted to DanClarke's post in the thread I would just like to say with Like Like.
    Morning All. :D Another hot one. Don't mind if I do. :) Shopping later. :( Have a great day. :D
    Jun 17, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Hippo's post in the thread I would just like to say with Like Like.
    Planted me sunfloers outside last nite. They is currently between 4 and 10 inch tall. About 30. Grow'd for the bee's and me squirrels to enjoy. Little dorrit f1 type.
    Jun 17, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Hippo's post in the thread I would just like to say with Like Like.
    Jun 17, 2025
Show older items