• Stanleysteamer
    Stanleysteamer reacted to Luke2025's post in the thread Disco 2 D2 Body burnt, friday 13th.. fml. with Like Like.
    Honestly I don’t know, I’d had thought you’d pay back what they paid you for the write off so you’d be at net zero. Not sure as first write off tbh. I don’t want to test it then find out I can’t buy it back and i’m a lot worse off. No the...
    Jun 15, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Luke2025's post in the thread Disco 2 D2 Body burnt, friday 13th.. fml. with Like Like.
    It is fully insured, comp too but the cash value they’ll pay is around 2.2k and I obviously can’t strip a lot of anything off that has had all the new parts, front axle for example. That’s if they’ll actually cover it and not put it under...
    Jun 15, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    Well the weather is well iffy here, thunderstorm early this morning, followed by us being in the cloud and now there are intermittent downpours. W's tum is playing her up so we aren't going up to the do at the "lac", if it clears up we may go up...
    Jun 15, 2025
  • Stanleysteamer
    Stanleysteamer reacted to kevstar's post in the thread I would just like to say with Like Like.
    It had a bulky case on it but it landed face down, the shock must have killed it as it just flashes. I'll have a look at them cases ta much. ;)
    Jun 15, 2025
  • Stanleysteamer
    Stanleysteamer reacted to kevstar's post in the thread I would just like to say with Haha Haha.
    Yup but if I recall no-one had spare carpet so this was phase II 🤣 🤣
    Jun 15, 2025
  • Stanleysteamer
    Stanleysteamer reacted to DanClarke's post in the thread I would just like to say with Like Like.
    ...brownie-points have been earned. Broken wind-sculpture welded back together and working again. :) Sausage bacon & egg brunch in a short while. Visiting the old MIL in hosp this PM. :)
    Jun 15, 2025
  • Stanleysteamer
    Stanleysteamer reacted to DanClarke's post in the thread I would just like to say with Haha Haha.
    Baps are boobies round here. ;)
    Jun 15, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    you're thinking of a "dap".🤣
    Jun 15, 2025
  • Stanleysteamer
    Stanleysteamer reacted to landowner's post in the thread I would just like to say with Haha Haha.
    Mornin Happy Fathers day (is it today?) Some beer and a card appeared in my kitchen while I was out last night anyway 😊 Cloudy bright here, just sold a wood vice, got another and a large proper one left to sell. GF bringing a bacon roll / bap /...
    Jun 15, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    So not even an MG Metro engine!! No wonder the power is lower than mine was. Raffling lot should watch it as regards Trades Description Act. :(
    Jun 15, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    What he is doing would be illegal over here. On a Sunday you can only mow your lawn in the morning. Can't use powertoools at all. We have to watch it as we often want to use my big machine etc over what the frogs think is lunchtime i.e. 12 till...
    Jun 15, 2025
  • Stanleysteamer
    Stanleysteamer reacted to DanClarke's post in the thread I would just like to say with Like Like.
    Morning All. :D A decent nights kip but then the NDN resumed his DIY building works at 08:56. He is hammer & chiselling out masonry. The noise travels straight through the ground and up our side-wall. :( Looks like a nice day out there, coffee...
    Jun 15, 2025
  • Stanleysteamer
    Stanleysteamer reacted to DanClarke's post in the thread I would just like to say with Like Like.
    Well I would agree with you entirely. The spiel from the raffling org said it was all "souped up" with a stage 2'd head but when I got in touch with the previous owner directly before me he said it was a standard 1275 Metro lump in a Morris Mini...
    Jun 15, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread Disco 2 D2 Body burnt, friday 13th.. fml..
    Can you take the insurance value and buy the wreck off them? Then at least you can salvage what is worthwhile. Are you sure the chassis is fecked? I can't help but think it'd take a heck of a lot of heat to do that. whatever, best of luck...
    Jun 14, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Forrest Gump's post in the thread Disco 2 D2 Body burnt, friday 13th.. fml. with Like Like.
    Helluva loss but at least you and any of your family weren’t hurt. That would have been a disaster. Hope you get sorted out there.
    Jun 14, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread Disco 2 D2 Body burnt, friday 13th.. fml..
    OK, I'm going to dare to say it. Isn't insurance involved?
    Jun 14, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread Disco 2 D2 Body burnt, friday 13th.. fml..
    Man I feel for you. :(:(:(:(:(:(
    Jun 14, 2025
  • Stanleysteamer
    Stanleysteamer reacted to frostythor's post in the thread Disco 2 D2 Body burnt, friday 13th.. fml. with Like Like.
    strip off the bits you can as you may need them for the new one you will buy
    Jun 14, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Wimblowdriver's post in the thread I would just like to say with Haha Haha.
    Hope he don't trip on the way out and bust his new phone :eek:
    Jun 14, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Turktowner's post in the thread I would just like to say with Haha Haha.
    Dunt you worry, he'll trip over the step going inna shop and get an new S25 in compensation...
    Jun 14, 2025
  • Stanleysteamer
    Stanleysteamer reacted to landowner's post in the thread I would just like to say with Haha Haha.
    Just a thought... On a non standard engine throw the reference books away :)
    Jun 14, 2025
  • Stanleysteamer
    Stanleysteamer reacted to DanClarke's post in the thread I would just like to say with Like Like.
    I have an excess of soot on all plugs. I will pull all 4 tomorrow and take a picture (hopefully a decent one) to show y'all. I have a set of BPE5 plugs I could put in to see if they stay cleaner as they run hotter, but the book does say BPE6's...
    Jun 14, 2025
  • Stanleysteamer
    Stanleysteamer reacted to landowner's post in the thread I would just like to say with Like Like.
    I've had more than ten Minis, gave up counting I've only ever had one that ran with light brown plugs and it burned an exhaust valve out. If you're anywhere from light grey to black without soot then it'll be fine :)
    Jun 14, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    Sniff your exhaust, see if it smells of petrol and try weakening the mixture a bit. and keep doing proper plug cuts until they get to the proper brown colour.
    Jun 14, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    Flipping quote for house insurance has gone the roof! :mad::mad::mad: This is for the UK house. Obvs we have to pay two, one for each house, and in each case it prolly costs more cos we is away from the place 6 months a year. Policy gone up from...
    Jun 14, 2025
  • Stanleysteamer
    Stanleysteamer reacted to Wimblowdriver's post in the thread I would just like to say with Like Like.
    I remember you making them. Maybe they are just falling off in sympathy with yer FL doors :D
    Jun 14, 2025
  • Stanleysteamer
    Stanleysteamer reacted to DanClarke's post in the thread Getting Gwen the Mini to Run. with Love Love.
    Yes indeed, it left no trace. The oil is still clear from the last change so no black trail. I did put a tell-tale there and it came away clean and dry (still is) but after tightening the cover T-bolt a bit more the seep/leak has clearly stopped.
    Jun 14, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread Getting Gwen the Mini to Run..
    Glad you sorted it!
    Jun 14, 2025
  • Stanleysteamer
    Stanleysteamer replied to the thread Getting Gwen the Mini to Run..
    Steel tres étrange zat you did not spot it running dahn zee sahd uv zee engine top!! 🤣 🤣
    Jun 14, 2025
  • Stanleysteamer
    Stanleysteamer reacted to DanClarke's post in the thread Getting Gwen the Mini to Run. with Like Like.
    Stirrer! ;)
    Jun 14, 2025
Show older items