Disco front end back together fitted 2 new front bearings, diff back in ect ect wheels swapped over too.
Found a bit I need to weld in the osf inner wing tis the rectangle part, can be seen once the wheel is off & you look up so
ive decided to...
Thankyou Stanley, much appreciated, I did pay more than I wanted to but this car was just too good to walk away from, I paid well south of £10,000 from a dealer but via a mate who is in the trade so effectively a trade deal .
I’m hoping you can help me, I’m at a dead end and no end in sight!
Recently forked out for two new garret turbos on my D4 XS 3L V6 2010. This was due to indie finding considerable amount of oil and decided to replace. Prior to this inlet...
Probably.
If you manage to look underneath you should be able to locate the lever to which a mech needs to be attached.
Mine is identical to yours except one year older, many many more miles on the clock and quite a few more owners.
So I am...
Right, first off, those rows of stitches are not how they come from the factory. some previous owner must have taken it off and stitched them together like that. from the factory the flaps are glued down.
Secondly, I can tell from looking at the...
I dont know the seats.
But as you tension it just sort of pushes the cushion forward with a bit more support, yes?
If so could you not just put it to the slack position and the place some 5-10mm medium/high density foam in there.
J
Tis a wet start, I want to get the front end back together on the disco (bearings calipers ect) swapping the wheels over too.
Got a D1 to pull out a garden to get parts off it as its getting binned.
Eye has bin gerrin up urly this week and wukkin long hours. Eye is now int bed at 7pm. Bort meself a new charging cable yesdi from argos. Couldn't get me argos password right so used their pay terminal fing. Me rain harverter is happy. Looks like...
No need to cut the seat open to remove them.
You can remove the headrests by getting a longish prybar..put it between the headrest & seat hold it against one of the
metal rods & whack it upwards with a hammer to release one side then do the...
I've repaired both of mine and all I did was superglue the flaps back in place to where they were when fitted. I get the feeling you didn't relax the mechanism to its max and then pull the flaps back to exactly where they were before trying to...
Shocked Wallaby mother at London zoo finds a recent stowaway. The unusual guest cutely named Bob, was later transferred to the monkey enclosure.
Reporter Debbie Dimples
Photography Archie Phartpants.
Oh flip, what you done there then. I use tiger balm on my injured bits.
Kev's tip of the week.......
Dont use tiger balm then go for a pee. :oops::oops: