Wevva trying to start raining again. Collected 250L of water last night. Gorrup smornin as me fence were rattling. One squirrel on me fence and 3 running round the feeding bit on me patio lookering for food. Normally they would fight each other...
I wanst ruff at all, I done a few cuts on the boom & eyes for the rams ect with a gas axe, used the sheer to twist the tracks off
then slewed the rear weight to either side & shoved it down onto the ground (so it cocked its legs lol) then slid...
Had to jump start a Range Rover this morn, wivs my lickle Ford ...
he reckoned it'd take a while to put enough juice in it as it was 'dead' ... 30secs of me giving it enough for the ECU to say 'oh, hello' ... :cool:
Just bin out to havva look at me hengineering master piece. Not ma hippo. The other one. We is harvestin water atta steady rate. No 1 water butt is nearly full.
There is a whole lot of legal wotnots to this, it must not be sailable but not yet condemned. Then theres the hazard & pollution
side of things. Id say he'd be better to say he was sleepwaking & got hit by the ship & call Digby Brown...
Errrr yup I think is the answer
I destroyed a 40 Tonne Doosan digger in 2 hours yesterday, a yard customer came over & said it was like an apocalyptic scene out a movie 🤣 I also said to the yard owner dont come over until ive cleaned up but he...
My good sir you were right again, I flashed the stock map into the NNN ECU and the error is gone.
My car is pretty slow from 0-2k rpm feels like a huge delay then it pulls good between 2k-3k and struggle a lot between 3k-4k with the stock map or...
"Power and water outages were also reported in the town of Cavaliere where 250mm of rain fell in the space of one hour."
Has to be pretty record-busting. :eek: :eek: :eek:
Busted a bit :mad: These were the new hardened cutters had to refit the old ones so didnt get much done today.
One of the blades looks to have been fractured for a wee while plus a bit of grinding & welding to do on the lower part of the
claw...
Yes will continue to work at it, but doing well since have smoked for 45 years
Gearbox went ok today valve block was bit tight but came out in end, used a socket to compress neutral manual selector, see a strip down video on YouTube simply...
I did the lead swap, but it's not doing it at all now, so maybe a curve ball in my long term diagnostics. The next job is to clock the rockers and see if the cam is playing up on number one, eg, sticky valve or worn cam. Maybe it only does it...