Had new fibre thingy cable installed today for the inter web and telly phone. The old copper cable is redundant at midnight tonight. Me lappy is on the new system now.

Just above freezing then :p. Soon be time to take the string vest off again

Dun't fink so

I think white pipe isn't stable in sunlight. My bathroom grey water outlet is in white till it empties into the downpipe hopper. It has hardened and cracked over time..

I hope you are paying yourself the union rate! 🤣 🤣 🤣 🤣

Afternoon folks :). Well up and at it with grinder in hande at 06:30 to make some dust, then chase out before the builders got here this AM. Then went into town to insure the "beast". Which has now developed a leaky fuel O ring, so will have to...

Tis extremely hot here for this time of year. 😅 😅

They are supposedly trying to tell me how my pension transition will be affected if I retired between April '15 and some other date. I retired on 20/4/2015, so it'll hardly affect me, if at all. It is all to do with those who paid in originally...

Bit like watching paint dry 😯😯

Is it UV stable?

Looking very good Dan you can have a nap now😂😂

Under attack

corrected that for you 🤣

We had to use one of these under the sink in the downstairs bog. Unsightly they are. It came with a very nice stainless, streamlined looking trap. (Only visible when sitting ont bog!)🤣

@Hippo if you find the 90 bend does not fit your harvester, you could try one of these as a transition piece ---- https://www.screwfix.com/p/floplast-wf07-flexi-waste-straight-coupling-grey-30-38mm-x/29220

Doing a simple job of trying to attach waste to a kitchen sink I found out that old waste pipe, i.e. 1980s, is slightly different to noo 43 mm pipe and both are different to the weird waste pipe that came out of an old Franke sink. (Which I had...

Just measured a couple of bits of pipe. 40mm pipe measures 43mm o.d. The 32mm pipe measures 35mm o.d. Measured with a caliper, not blocks of wud :D

Can't find me caliper to measure me waste pipe. Fink its 40mm. Me harvester is 32.5. End bit narrows to 31 eye fink. Measuring wivvit between two blocks ov wood.

32mm pipe. Is that the internal or hexternal measurement? Just found a lenf of down pipe and 2m of guttering in ma ippo's garage. Gutter too short fer plan b. One less down pipe to buy.

Ses the pipe needs painted to stoppit gerrin sunburn. That may be why ne baff pipe outside bit issabit soft. Yer can squeeze it.

Morning All. :D A much cooler morning today. :( Have a splendid day. :D

Ma ippo's built fer being a trusty 4x4.

Well they priced the job and I didnt try and haggle the price, so I guess they earn what they earn. Price is all relavant though isnt it. A packet of fags is less than £3, a six pack of beer is less than £3 so to sustain a worker is pretty cheap...

That one is for 40mm pipe. You can get one for 32mm pipe. Like this one ---- https://www.screwfix.com/p/floplast-wc10-universal-compression-waste-bend-90-32mm/90571

You use your FL to harvest water?? Oh well, you finally found a use for it :p

When eye fits me water harvester fing to me drain pipe eye need ter run the output along me castle wall, over the top of 4 foot of gate and fence, to me garage guttering. Output on said harvester is 32mm at the end. Tis a slowly tapering fing...

Fink I'll give that one a miss tbh.

Well here where I live it's a minimum £150/day per man.

Snot broked any more, I put a 25T shackle on it nearly good as new. Come to think about it I didnt test it, weapon of choice was the sheer for the afternoons destruction. :D:D