I'm fitting a new 9" clutch to my S2A, along with a new spigot bush. Can I use this as an alignment tool? https://www.paddockspares.com/0314-clutch-alignment-tool-universal.html Otherwise do you recommend I find an old input shaft somewhere to use? I've not fit a new clutch before so I don't...

@admins - please move to the Series Engines forum if more appropriate. ..I'm going to post a few updates and questions here over the next few weeks of this engine work..

Right, I've got the head off. It had a composite head gasket on which was still complete when I peeled it off the underside of the head.. it's been on a while but it's not blown. I need to clean things up for a proper look at the valves and to measure the bores. I don't know what I will do yet...

now then.. All cylinders 120 dry, 130 wet. And I’d say it’s puffing gently out the oil filler tube when ticking over, but I don’t know what’s normal? So it seems the compression and head gasket are both reasonable. Maybe the rocker breather was just blocked after all.. unless there are other...

You've made so much progress since I was on here regular Steve. Well done! Lovely work! Looking forward to seeing more as you do it now as I'll be around a bit with more work upcoming on mine.. :)

Blimey that's impressive, I didn't know they could get along that well with a ruined head gasket. I'll let you know after the weekend. cheers!

Do I want to check that if it's spitting oil? With the cap off that could be a face full of oil right? :D It is looking like blowby isn't it. Don't know why it's only just started though. Will do a dry and wet compression test this weekend and share results. Could a head gasket split between...

I've just took my 2A up to Gaydon for the weekend. It was a 2hr 45m run up to the show and it seemed to run as well as usual but when I next looked in the engine bay she'd been spitting some oil out the oil filler. She didn't have too much oil in.. so as I'd never had the rocker breather off I...

Alright! :) I'm back with a small update and a [question I moved to the Series Land Rovers section..] Only thing I've done to her lately is new pinion diff seals front and back as they were both leaking badly, and bled the brakes before taking her up to Gaydon last weekend. That was the first...

Ordered one myself. Cheers!

I got the dust caps off with some degreaser heat and gloves for grip. Cheers. Seems it's not worth replacing the gaitor. The one on the front prop is starting to go but it's not actually split yet. Been on there 12 years so far.. probably more life in it than one of the new £3 if this thread is...

Very helpful PDFs Blackburn, cheers!

Ah! Is that right? That's the one that's missing one. Any particular reason?

I've got both prop shafts off my 2A so I can replace both diff pinion seals. Both props seem good, no UJ wobble and no noticeable spline wear. The gaitor is missing from one and needs replacing on the other. What's the trick for unscrewing the cap on the short half so I can separate the props...

Cheers guys. Got some bits and will be seeing if I can't sort this out soon.