Trying to do some more research into this, I’ve come across this image showing the same model of cable I have - PRC6022
The Speedo end of the cable in this photo comes out further than the end of the white plastic connector, but the cable I have...
My thinking is that the engine will turn over with low battery voltage i.e 12 volts but the LEDs may require slightly more to fire up.
My TD5 Disco would fire up no problem with low volts but it wouldn't rev as the ECU didn't like it.
Worth...
Eg
https://www.ebay.co.uk/itm/394081005516
(I've not purchased that one, know nothing about it, etc etc but it shows what's possible for a tenner, ish)
“Owning up” is a 7 day ban @julianf 😂
Light stalk, indicator stalk are both brand new (washer stalk is not, but I had assumed this was totally unrelated to lighting).
Fuse box is very ropey - glass fuses, spliced wires etc
Wiring on the light...
If you are wedded to LED you need to spend real money to get good quality ones. The cheap units themselves seem to be full of reliability issues.
Even once you have good quality reliable LED light units you then have the issues pointed out above...
LEDs are a nightmare especially on older vehicles. They will pick out any corrosion or bad connectors etc and simply not work, where a regular bulb/s with the extra current draw will just carry on like a bull in a china shop
Check. Every...
Similar to Phil's comment -
If your connectors have long prior melted off and you are dealing with spade connectors only, be sure they are all in the right place.
Mine got mixed up once and exhibited similar.
Of course, swap the lights over...
My thoughts are ... get rid of the LED's and go back to normal, incandescent bulbs that the vehicle was designed to work with.
This forum is 'full' of LED bulb problems ....
This is the one I bought, which seems to be the same as the old one (albeit not snapped)
https://www.lrparts.net/prc6022-defender-speedo-cable-for-right-and-left-hand-drive-models-up-to-1998.html
Yes, it clicks in nicely when attached to the Speedo clock but the needle never moves.
I’ve also tried spinning the cable with a drill from the other end and the Speedo doesn’t move
I had meant to post this last week when I had this situation.
I have LED headlights fitted to my 1991 90.
The issue I had (may still have) is that the drivers side full beam didn’t come on when the stalk is pushed in, and the drivers light...
I have purchased a new Speedo cable due to the old one having a snapped plastic clip and the Speedo needle bouncing around.
The new cable however, when installed, doesn’t move the needle at all.
Removing the Speedo, I can see the thing spinning...
Removed ropey indicator and light switches and replaced. I know have full beam on one side, so the switch was definitely dodgy. Need to work out why only one side is working.
1. Gentle tap with a infant squeaky toy hammer.
2. Next industrial oil rigger blow torch.
3. Good wad of Plastic explosive and a inch of electric charge fuse wire to a detonator.
4. Star Trek ship precision forward torpedo.
5. Lava flow from...