I know this has been done before and there is lots of information out there with the glencoyne being the definitive guide for this (link) With many thanks going to @RustyDefender I have a 300tdi engine to fit to my sons '88 110 (Thread link)...

@dag019 has saved the day and is going to come and take it :)

I’d buy a lottery ticket if I were you!😉

It's 100% 300tdi + LT77, previous owner cut and welded mounts back.. has a steve parkers kit, so can give you the extended hoses also Everything can go - I only need the transfer box, even have a brand new clutch kit to give you (LOF heavy duty)...

No need for the money, Just need it taken out otherwise someone is going to charge me £800+vat to come and do it :(

Hey, I'm going to be doing a conversion to a m57 + 8hp70 start of next month, is anyone wanting a 300tdi and lt77? No cost, just it needs taking out of the d90 it's in, frontend stripped already.

I’m taking a 300tdi out of mine in a week or so if you want it otherwise it will collect water outside 😂 doing a m57 swap

Progress report just in …. Last nights man cave rituals saw the rear axle being adorned with new YRM stop plates and trailing arm hangers then cleaned up and prepared for rust proofing in the morning. Celebratory drink was called for which was...

I think at this point you might as well hire people and make a business from it 😂 can't wait to see this one rebuilt... keeping same engine?

It’s started again .. my neighbor’s must think that the misses is having an affair with Simon the DPD delivery driver 😂 as hes starting to spend more time in the house than I do

Progress report, despite it being a day of rest the bloody cat “Hector” made sure I was up at 4.45am ! Convinced he was as keen as me to get out of bed and into the garage I later found out that Mrs Hughes has locked the cat flap while cleaning...

Just dont look too closely to the 20mm of filler peeling off the front wing 😂 Im still wearing my rose tinted safety glasses

I had an Adwest box fitted by my local Indy. It was recommended over fitting new seals or any other replacements.

Is the relay overheating and resetting once it cools a bit?

Use that place i suggested, they sorted me out and no issues with the box 6+ months on :)

Is there a any difference in location between both boxes on the LT230, i know the 200tdi has a different mounting type of rubber/fixture for the transfer box? I know the bell housings are different sizes across discovery/defender etc, but this...