Oh thanks to both of you, I hoped that just putting my working logic board from a lowline into a highline and then putting the highline BECM with my lowline logic board in the car would do the trick, but I won't be doing all that just for front fogs.

Hi again everyone, so I have a spare highline BECM, but my car has a lowline BECM and was thinking of just swapping the logic board from lowline to the highline unit but have read on forums it won't work necessarily so I wanted to ask around if...

As I said, add your town name / location to your profile. Might be someone nearby with Nanocom.

I fitted the stalk with trip computer buttons and it doesn't work. When I get my hands on a nanocom, I'll check if it can be enabled and update the post here for future reference.

Oh, so I will be able to enable it in nanocom with no problem?

Hi again everyone, I have checked and I have an L so lowline, but I noticed that the DSE with the correct stalk also has a lowline BECM. Now I am wondering, what difference is there between lowline and highline?

No, I do not. I have the full HEVAC, cruise control. That is it. Thanks for the tip, I'll check tommorow on the BECM.

I dont currently own a nanocom, is there any way to know, if I have a low line becm

Just change the stalk, nothing else to do, did the same on my LHD P38.

Ok, thanks

Hi everyone, so I have a 1997 P38 2.5 DT that doesn't have a trip computer, but I also have a P38 2.5 DSE I am using for spare parts and the stalk on the DSE is the one that has the trip computer functions. I want to have the trip computer in my...