So did i🤣

Good evening, First post so take it easy lol I recently purchased a l322 td6 2004, within a month I had the well documented LCM issues. Sent my LCM to be refurbished and problem solved......or so I thought a couple of months later the problems...

Hi Keith yep, the green circled ones are for the prop as you say, mine was the same but I repaired it and bought a new part, I am a tad OCD with parts that are not there........ ;) Edit: BTR2942 - STOP-SPARE WHEEL STRUT

Park my dear, paaarrrrk😜

In reverse!? It's an automatic

Don't know about gems, probably yes. Thor almost certainly yes

If you email them they'll tell you. They're very helpful with me.

But if a man had emptied his CATs of the ceramic honeycombe stuff, say with a long pokey stick, and then just put them back, you're saying a 1997 GEMS 4.6 should be able to pass an MOT emissions test if all the other parts of the engine are in...

Try it with the foot brake on and see how much it complains :)

Is the handbrake on the wheel? As the car changes height there's bound to be a little rotation on the axis where the axle would be.

i always assumed it was bushes complaining

Absolutely amazing work sir. Hat off to you on this effort. Long may you enjoy it.

finally here we are! not yet 100% but in the meantime it's on the road!! now I've disconnected the air conditioning compressor because it started to make noise, when I have time I'll disassemble it, the fabric of the headliner still needs to be...

Fink if you is doin very back winders yer needs an eggspensive type one that don't interfere wiv aerials init. I is got em an I finks they is cool init :cool: My tunes maker sound crap and no AM cos I fink last dude fitted crap stuff init.

Improved my fuel economy by fixing a leaking feed pipe to the HP fuel pump, 2 hours removing the intake manifold tightening a jubilee clip and putting it back together. Would have been quicker if I'd had cake. My drive will appreciate it as well...

Dare I say it, you ain't pulling hard enough'.. 😜

Mine creaks if I adjust the height with the handbrake on and in park. Much smoother in neutral and no handbrake. As long as you're not on a hill :)

I searched for C1392 and found a thread on another forum that solved the issue. I would not have found it without your help, thanks. The answer is in the attached image, it is a redundant plug for non memory seat models.

Maybe Lunatic Confirmation Module

Is that the Lunar Control Module?

Kermit it goes with the song "fly me to the moon" 🤔🤔😇😇😇😇😇Mozz

Give it time☝️

I have no idea tbh, pure guess. Only had the car 7 weeks and not even taken that trim off yet.....

Wondering if it could be this if its not meant for the LCM on the A-pillar.

Simple is usually more effective 😜

I recently replaced my fuel line with AN6 line on my P38 but that uses the bosch style quick connect fittings. So was reasonably easy to do. https://www.landyzone.co.uk/land-rover/an-lines-on-a-p38.397607/ If your pump uses the normal push on...

The 2 screws are not screws but bolts that hold the bracket for the prop for the boot floor when it's lifted. At least that is what they look like.

Those in red are threaded holes for cargo tie down points. They are surposed to have metal plugs insterted from below and then rubber coated over that but i assume yours have rusted away.

Im assuming you mean the plugs. But no probably not, they are stamped sheet metal. Id just get a short stubby galvanised bolt and turn it in there from below just to plug the hole and the galvanising will help keep rust at bay. They just standard...