What do you mean with "check resistance from sensor back to the engine ecu"? I don't understand this terms and please tell me how can i do this.

Hi. The hp sensor it's the one on the injector fuel ramp?

Hi, Dash warning it's on at throttle (doesn't matter if engine it's warm or cold). Car starts first time, every time hot/cold, for example, yesterday we had -12°C and car started as a petrol one (very good, instant).

Hi. I've done measurements again: Pin 3 : 4.2v at idle and 3.7v at 3000 rpm throttle. I have cleaned both plugs/sensors. Same problem.

I will do tomorrow that test again and see. Today i am too tired...

I have clean just the hp one (and i ended up without the rubber protection for that one). I will clean tomorrow both of them again and see.

Hi. I changed pump today, it has great and stable pressure even at high throttle but problem it's still here...i don't know what to do next

I already ordered lp pump but i asked part no for lp sensor just to see price in my country and still , i can't find Hope tomorrow pump will arrive. After i will change it, i will keep you updated. Thank you for advices!

I already ordered lp pump but i asked part no for lp sensor just to see price in my country and still , i can't find this part here...

Can you provide me please, some part code for LP sensor? I can't find this part.

Hi Alteredtech, any thoughts after measurements?

I have measured lp sensor. Pin 1 it has 5.06 v - idle and throttle Pin 2 (it vary between 7 and 10 kohm) i have an automatic measure machine and i think that's why it shows like this on zero scale Pin 3 it has 3.8v at idle and 3.2v at throttle. What i should do next? Pump changed or this...

Hi. With lp sensor out, live data shows 440 kpa every time (at idle and at full throttle) and eml with exclamation mark still appears (still with sensor out). Any ideea how can i measure this sensor? Needs measurement on sensors pins or on plug's pins?

Brasov area it's great. Good food, great landscape, very nice.

I will test tomorrow lp sensor and see. As an ideea, can you provide a part code for LP sensor because i can't find this part.