It’s a 2 owner not much else to say as it’s in the negotiations stage at the minute but fingers crossed it will be mine in 24h 🤷‍♂️before you southern lot start looking It’s up north 😉🤣

I'm glad you've posted these pics. I nearly chastised you for not putting them on your original post about the rails!

Fitted a new full length sump guard. 8mm aluminium, powder coated strongest available as the rest don’t cover the engine.

When are you going to do a proper upgrade to a Freelander Warren? You know, an EV conversion. 🤣

I have a towbar with normal trailer wiring plus the caravan plug, and the extra pin flasher unit which does the dash light. oh, and Dad will be pleased to have an LZ birthday greeting. Thanks Andy.

Sounds great. I'd like one of those. Also, will you be doing anymore induction kits anytime soon?

Had a very odd one this eve. Went out for my dad's 86th birthday and on the way back from the meal the trailer lights indicator dash lamp started flickering. Upon getting home a slight burning smell was apparent and seemed like it was coming from...

Morning @Freddie17 . That's a good reminder. I've been ignoring this thread so much that I've simply not had time to update it. I've been seriously doing a 24/7 ignore marathon for a few days now and its gone really well. Hopefully the other...

Fitted a set of roof rails onto mine today. Have just bought a set of LR roof bars to go onto the rails, so I can stick my roof box onto it later this year…

Good selection of wheels on them too

Counted them. It's getting out of hand :rolleyes: and that's just the ones on the road.

Added daughter #3 to the insurance so she can drive it because her vehicle is terminally dead. Pound to a pinch of **** it comes back with an empty fuel tank, and a cab full of empty sweetie wrappers and dog hair.

Hello, not long taken ownership of a series 3 88 in marine blue. Currently the series 3 is in bits, bulkhead repairs, footwells, A pillars and one vent repair. Small plate on the chassis to be stitched in. And lots of little bits. I...

I've never had any worries. I've just always felt they are not as good brakes on other vehicles I've driven

Good stuff. Have you noticed any improvement over what I have always felt are fairly mediocre brakes on the FL1

How are your's performing Andy? I have the same ones in my Ebay basket and I'm poised to "buy now"

Too much conflicting info. I say go with what the specific manufacturer of the disks you have says.

Well there's only one way to know which way around is better now... Line up on the start line...!

After the suggestions, a bit of googling suggests to me its a facelift/phase 2 R5 turbo. NICE!

What's the white car in the corner of the pic?

Check with @andyfreelandy . Those disks might be the wrong way round. I'm not sure though. I got confused by his thread. :p

OK so a couple of days late but we have it charging again. ☺️ ATM The coolant pump is going full tilt as I had an issue with the Arduino, and I can't schedule for overnight charging yet but that will be next. I had to rewire some of the 12V...

That bloke wiv the dodgy diff has now decided he is going to have a go at it! Pleased for him. It is all too easy once you get to a certain age to simply let things slide. Me being a bad offender!

New vented, grooved discs fitted. Ceramic grease where needed. All brake dust cleaned out. Wheels cleaned too !! See how it goes. Was quiet on test drive. Need to bed them in for a few hundred miles.

I reckon I've ignored this thread the most today.

Good point - I’d completely forgotten about that rule. If @MGT doesn’t come forward with a valid explanation soon, I may well sue for $10 billion a medium-sized Fruit & Nut

If it was REALLY complicated I wouldn't be able to cope. Like I said, I connect one wire at a time and after many hours the number of wires has reduced by a few. Some day they will all be connected.

Anyway. Important news. Coffee machine is on and I’m busy ignoring for a few hours this morning. @MGT