Top work

As stated. Vehicle has had a replacement engine (112k) and new Borg & Beck clutch. Tyres are as new, well worth a look if you want a 5 door TD4. https://ebay.us/m/kSOZhc

I'll scour the Tratter threads. Surely if anyone can recommend some wonder product for injecting into box sections for preventing corrosion it'll be them!

Meyle heavy duty ARB links fitted today

I can't complain. It served it's purpose and I only paid £200 for it and the scrappy said they'd give me that for it so with one abs sensor, some wiper blades and two second hand tyres it's been cheap motoring for the year. It was a great little...

Noted! Great pics. I'm just wondering if it's worth Lanogaurding the externals and getting something a bit thicker to inject into the sills?

Do you have very large tree or trees. You could be seen as a predator and they're trying to scare you off. Here is my Barrister Sir Reginald Fortisque-Smythe KC to offer advice for a fee.

Yep, just from the flexi union, around the chasis box section.

Just incase anyone else has this issue in the future. I took off the plastic piece that was blocking one of the line which would normally be the turbo filter. I attached a hose and the filter and reattached the other hoses to the vacuum pump...

We had a spate of this at my work car park a couple of years ago. Fortunately I was unscathed but loads of people had damage and one guy spent well over £100 on wipers. He took to putting carrier bags over the blades every day. I'm told one of...

Modern cars are too complicated nowadays aren't they

Legend

Made up your brake pipes this afternoon. 😀

It would be difficult to get a good one from a scrapper, with all the arms etc as it seems these motor's subframes are quite susceptible to the rot. Also, the gearbox has a fair old whine on it so not sure how long that has got. However, if I had...

When I first had my second Freelander td4 auto there were a few problems and advised to change the maf sensor which I did now 13 years after suffering a few problems like smoke on start up and acceleration ,I had enough and was going to sort it...

My old banger £200 daily driver runaround bmw failed the mot today with a knackered subframe. I had a good look at it and the whole rear suspension looks like it's been parked in the sea for some years, so sadly off to the scrappy it goes. It...

I think this is your best cartoon to date. I think teacher would say "10 out of 10, keep up the good work". However...... Unless that was a spare pair, I speak for us all, when I say, thanks for not doing a full frontal on that one!

Change of tack this morning. Instead of ignoring this thread I've decided to ignore some suspension knocks, saggy headlining and a floppy drivers side mirror

Lovely night in work in royal mail an area that noted for being a sweatbox😟 Only thing keeping me going was to ignore it. When all around you are speaking a foreign language I blank it. When I get back home to bed. I eventually ignored the din of...

Morning fellow ignorees. Just checked in to see how it's going. Well done all! Keep up the ignoring

Please ignore.... This is the thread I've looked at the most in months! Really must start ignoring

He has an F2. All good for you 😉

FL1 is auto trans fluid which is red / brown. Think OP has FL2.

Thanks chaps. I remember it being ATFu now. I'll have to revert to noises and play being down to age and mileage then.

You've got me worried now. I'm sure the stuff I put in last time when I was doing a bit of a change was red

Investigated knocks and rattles from the front suspension today. Whipped off the drop links and went for a quick spin. The links were pretty tired and most of the noises were eliminated, except the worst knock. New HD links on order and the...

ABS sensor removed cleaned lightly lubed and refitted - pushed onto the reluctor ring and that backed off just a 'tad'. 3 amigos GONE. :) HDC works as it should... Very happy

So do I ignore your post and notice the thread, or ignore the thread? I'm really confused now.

Did the school run it it today. It failed to start after the pickup. A wiggle of the starter wiring and she was away!

I'd just like to point out that I'm not posting about this thread and I am ignoring it, but that thread just doesn't cut the mustard. I think I'll definitely stay clear of it.