-
Kerlaan reacted to andyfreelandy's post in the thread Freelander 1 Headlining and Door Panel Replacement - completed with
Like.
Done it. Like using the suede effect. Nice and thin and stretches. The best tip is only to glue about 12 inches, sorry 300mm at a time and take your time. Don't glue the edges until you are done and then the glue won't grab the fabric while... -
Kerlaan reacted to andyfreelandy's post in the thread Freelander 1 Headlining and Door Panel Replacement - completed with Like.
Made up a couple.of map pocket presses to make sure the headlining sticks in the corners. A bit of profiled skirting and 36mm waste pipe !!! Bolt goes through the fixing hole in the roof to pull them in firmly.
-
Kerlaan reacted to andyfreelandy's post in the thread Freelander 1 Headlining and Door Panel Replacement - completed with Like.
A time saving update. Doing the headliner in the Sport now. Tried taking all one side trim out then folding back seat and winding front seat back on the same side. Headliner drops and un hooks from side with trim still fitted. Means you only...
-
Kerlaan reacted to andyfreelandy's post in the thread Freelander 1 Headlining and Door Panel Replacement - completed with Like.
Materials. Lining: https://www.ebay.co.uk/itm/275162016328?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=IF1BhdWJTLO&sssrc=2349624&ssuid=b5qQSb6hQNK&var=&widget_ver=artemis&media=COPY Adhesive...
-
Kerlaan reacted to andyfreelandy's post in the thread Freelander 1 Headlining and Door Panel Replacement - completed with Like.
Some photos - removal is the fixing studs which need a trim remover, clip on A post covers, clip on B post covers, rear boot side panels, rear boot window panels. All fairly straight forward except the rear boot window panels that I hadn't...