Hi Guys, I have a P38 2.5D Auto which now only drives in reverse.I have seen from previous threads on here that it appears the A clutch is at fault. I have taken out the gearbox and wonder if this is a difficult DIY fix. Are the parts readily available? I would appreciate any advice. Joe

Having exhausted all the methods of synchronising and entereing the key code.I have decided to send the BECM to Irishrover to be unlocked. A few years back I had a problem with the transmission ECU on my MF tractor which was also caused by swopping batteries and jump starting.I should have...

To enter the EKA code.(a) I turn key Four Turns to left (b) x turns to right (c) y turns to left (d) v turns to right (e) w turns to left (f) then one turn to right to open lock. I also tried putting key in ign and pressing lock/unlock at position 1. I had problems with battery going flat...

Yes I have the owners manual and followed the procedures they give.I have also tried Overlandrover 's advice on leaving one key in ign and entering the code. Could there be a problem with the BECM?

Hi Guys, I have a 1998 RR 2.5 dse Auto which is displaying the " Engine Disabled Press Remote" message.I see that this seems to be a problem as I have read through all the previous threads on this Forum. I have tried re-synchronising the key using the different methods given...