Morning All. :D Me and Gwen are off to a show today. :) Catch you all tomorrow. Will try to get some pictures. Have a great day! :D

Morning orl. Us boys adder call vrum us gonzultant on Vridy. Er zez us be cancer-vree so us be well chuffered. Av tu geddus veet zortid now a then us be reddy fer ort. Vinylly goddus chikkins in proper owzin a fit fer winter. Zittin rume an...

I’m wondering what the engine is…

Undo the dash pot screw. Make sure the inners rise in the carbs. Then try no choke & foot flat to floor. Make sure you have a good charges battery

Moved it 10foot to open the rear flap for garden waste Miss driving it

As this thread is been ignored,not many are going to see it.. As it involves a freelander it should be in the joke section ;) (Good luck on the meeting.)

While ignoring this most popular thread. Publicity opportunity for the many ignorers!! https://www.landyzone.co.uk/land-rover/andyfreelandys-get-together-north-devon-september-13th.398282/post-5873023

More minor jobs. The steering box has been removed and given a good clean. It had a sticky residue of ATF but no apparent leaks so a good clean up and it will go back on. The drop arm ball joint rubber had split so a new ball joint was fitted...

Having wasted more time on the phone today, a friend from Luxembourg called in at the recovery truck place at Houffalize. Haad a lengthy chat with matey there who explained that the fan belt had lost about a third of its width at one point and...

Truth. You can get a special snips that avoids this. Or put up it with the blood.

Don't you just hate people who attach things with cable ties without bothering to cut the surplus end off :(

Put some Wolf copies on my son's Ninety.

I've made a start on the front suspension today. Things have come apart fairly easily: I'm painting Dinitrol on all the mating faces that you can't normally get at too, just to hold back the rust. And here it is going back together: The most...

Glad you're back at it, I thought you had got board and given up. I was about to make you an offer for it...a half eaten curly wurly and a packet of ready salted crisps (out of date) Glad your knee is sorted.

Sills bolted on, gearbox tunnel and gaiter in place, then took time out to do some retail therapy. Ordered a Heritage 1948 steering wheel and boss, heritage style grill, seat belts, wiper arms and aero blades, tailgate chains, Wipac LED light...

Wings fitted, along with the galv inner arches. New Green tint windscreen fitted and the vents with Stainless Steel pins from SP4x4.

Sorry, jet goes down if you inscrew it, I'm in the pub 😁

I’ve been very busy all week ignoring this

Think I sorted it out. New rear calipers slight modifications

That's kind! I ran out of proper blinds pop rivets and used the cheap ones. It's on and I think it will be waterproof. Hope so as I'll be sleeping under is in a couple of weeks time...

Weekend.. I thought I needed to catch up Where have you all been hiding

After more hours hanging on the phone to the UK breakdown people, we've all tried various LR garages in the area. Most have closed down for the summer holidays, they won't re-open for another 2 weeks! There's an offer to repatriate the car in...

Come on then… post a photo,you know we like these

Hello all. Turns out the SU’s needed to be chucked over the fence. New manifold, and a Hollie carb has solved the problem! Thank you to everyone who has contributed here, plus my other threads with my theories of fuel pumps, electronic ignition...

Thanks again, your comments much appreciated. I don't need remote as it not a daily drive just as well as it loves petrol!!So i am going to strip out all unnecessary stuff and go back to a basic system

Thanks for all the advice. Whichever way it's a dilemma! The simple answer is to get it recovered home. But even that is hassle. When I hd the oil cooler replaced just after I got the car I was advised then that the big turbo pipes were rather...

Room for at least three more in there!

Sorry couldnt resist :p. J

This is a artistic impression

Easy.