you'll find a wiring diag here.

Thanks. Sounds good. I'll go through them on that basis. I'll look for a glow plug one.... Yes, I have a fuse box cover, but it doesn't refer to the relays....

Badley made wheel arch extenders .. If something was that bad your rear tyres would show wear on the edges where the axle is tracking incorrectly.

Aaafternune Hayin tay a Corvis, Bo'ness If yer know, yer know 😀

If you unweight a wheel (and chock the others) when you are in reverse, with the engine running, and your foot on the clutch, does the wheel spin ?

The big blue relay is the hazard relay(also indicators) I’m thinking the others are Starter high beam Fog lights Fuel pump Glow plug will be a large yellow relay in the engine bay Have you got a fuse box cover?

Because the 1986 Landrover Ninety's had glass fuses not those moden bladed ones you have.

Bring them both back.. you can always sell them if you want.

Morning all Just spotted @derwendolly has been found… Get well soon and have some gentle hugs from us all, Everyone else be good & stay hydrated with any form of liquid you require

The 110 does not have an rtc damper. That was the td5. So just standard damper. The old box caught the bottom of the of the drop arm on the steering guard but the one previous one to that didn’t. So I will have a look in the morning and see if...

Pre-Installing an inverter/charger on a plyboard with large Anderson connectors and all cabling in such way that is quickly separable. Due to Dutch tax-laws the canopy must be easy seperable and removable in 1 motion. First photo is the pre...

Some do catch on the lip of the guards when the TRE rolls over. Have you still got a return to centre shock fitted ?

Put all 4 bolts into box. put on steering arm Turn steering(engine running) a few times to center everything up Then do that mounting bracket up. No bushes etc on the thread just that big washer

I’ve just checked with a colleague - 40’ container UK to Durban or Cape Town is currently $2675 US., quayside to quayside. Appreciate that’s just the sea ‘movement’.

Thats nice good luck mate lol. Now I see why you want a sheetbox to weld as you want a good excuse to get oot the hoose. 🤣🤣

I hear that a lot - but ageing parents is one thing, and the other is that life here isn't all safaris and sunsets; there is a lot that doesn't get published in the news, which is very, very tough. Everywhere seems a bit broken at the moment, so...

Put them both in a shipping container…

Also if the bulb holder is not in the correct location it may not work. Line up the holder with pins from the working side

Can you remove the bulb holder from the other side & see if it works in the bad lens? Unsure if the wiring is linked through the bulb/holder. Need a voltage reader and find the correct cable & trace the wire back to the light that does not work.

I'd stay in Africa. Seriously.

What’s up with the light you have? If the lens is not cracked you may be able to short out on the rear contacts to make them work

Check the following Handbrake drum. Is this tight? When the prop goes on is it still tight? The UJs in the rear prop may have worn & need replacing. Is the big nut on the transfer box(behind the propshaft) tight?

Do the hardest job.. A frame bushes & knuckle(replace the whole knuckle with carrier & new bolts) I used the proper bushes for this job as they are a pain to do if they go again. Make up your own brake pipes or buy the set for your car. Can of...

Well that’s 6 weeks to get the other list of parts needed. & the other 1 stripped. You don’t want to be finding you need parts & have to wait during the build.

Well I'm not quite sure exactly what the issue was but touch wood I've fixed it! Got her running again this afternoon after giving the float bowls another clean out, checking the float level and blowing out the needle valve. Then replacing the...