Make sure the nipple is on the top of the slave

Has the new D2 transfer also got the diff lock fitted?

I live in East Yorkshire so really dead flat its an LT230 D2 transfer box the whole point is to quieten it down and improve MPG The Defender transfer box revs incredibly high and its a bit loud, but with it being my daily this is meant to help...

Fair one. I've noticed some people don't realise they're terrible in Wales, Scotland, etc until they've fitted them, usually because people from flat country highly recommend them. And yeah, great deal that.

Pull out the speedo drives & swap

Bit the bullet and decided to strip it right back to bear ali, came across a few deep dents that had been filled in which is not what I would want to be re painting over. Let the metal bashing begin. Have to admit I do hope mrs hughes doesnt look...

u need a new led flasher relay! the tuneable type with the dial etc

One thing I found is if the bulb was loose in the holder due to poor tolerances a couple of well place matchstick would solve the issue.

Wonder if there is a service kit for the internals ? (Not found any more info yet)

I'll investigate giving more movement by adjusting the flat bar - I have a mill, so elongating the slots wont be an issue. I think in the long run the internal wear will have to be addressed - be an interesting project I think. I was kind of...

The handle & bar is also off a lot of the BL motors. (Sherpa,maxi Austin) Also may be off some MG Not found anything that looks like the mech.. yet.

I re drilled some holes to get a bit more life out of the latch system. There always seemed a lot of play in the at flat bar Never taken 1 apart, but would be easy to nut & bolt it back together Still have 2 latches on the early windup doors...

What’s wrong with it?

No. You are trying to get it removed cos you are an idiot :p. Can you post a link to the video? The great LZ collective can then decide. J

The umbrella should always be open as landrovers leak that bad.

Big rust hole in the door for the umbrella.

Have you drilled a big hole for the RR umbrella to go in? @Anaconda

Might explain the current setup! I bought the HiCap from a tree surgeon off a muddy track behind an old mill 💁‍♀️

Educated guess is the propshafts so I’ve ordered both front and rear and will hopefully have a clear afternoon this week to replace them. Buying new wasn’t a huge amount more than having them rebuilt, and much quicker too.

Is it definitely not salvageable? Your situation is not the same as mine but when I had the engine fire (thread LINK) the insurance tick box wrote it off as a cat B (can only be broken for parts by an authorised dealer) but with a couple of...

Who will answer if i phone that number ?

Not me…

Never worry about tyres in the forestry industry. Some logger will always pull you out.(oh they were pulling you into the woods that day, loading you & dragging you back)

Finished shortening the roof. Replaced a fuse for the electric fan/reverse light relays. Made a small list of what to do next weekend.

I will double the work (hours). You may also discover that the flywheel has a relief in it so will also need changing. Is it worth it ? Yes (IMHO) Don't get an LOF power clutch, if you must, the roadspec, but preferably a Valeo. Do buy the HD...

Gave my son a driving lesson he’s the boss now, 16 years in the making , does regular round trips thru some quite busy built up area,

I am delighted to say that the mini did pass. :dance: I have some things to attend to, but nothing major.

Evening all Did the mini pass….

I’m also the same when it comes to thinking of what happens in the future & making life easier. The build is going well. Like the 3D imagined pictures