Well I have got it it’s 2005 3 door sport premium in black beenstood for 8m not a clue about history just know it starts and moving under its own power It arrives Monday so I will put some pictures

Sounds like it could be the switch on the ignition barrel. Known to be problematic. The indicator stalk mechanism may be pushing/resting on wires that are connected to it, or maybe the small vibration affecting it. What ever, I think I'd be...

You really are a **** aren't you? We have had members on here install lift kits. Everything is fine for a bit, then their drive shafts have gone. So crawl back in to the hole you spend most your time before coming out and showing yourself for...

Why you getting all hot and bothered? I know there are plenty of lifted FL2s about - I never said there wasn’t, did I? And some will see no difference. And some will eat up other components quicker and end up replacing driveshafts and the like...

If that doesn’t work for you you could try this:

Possibly - I’ll look next time I plug LR SDD laptop in to it. If it works and I can configure, I’m happy to come over @GrumpyGel and do yours, but you’ll have to cover expenses 😵‍💫🤪

Although, if you are throwing parts at the problem, rather than finding the error code, if you bung a cheap pump on and the problem persists as-is, you haven't wasted much cash and can put the original back on. I to, feel sure that if the EML...

If the engine light has lit once, there should be a code stored to read. This will direct you better than changing parts randomly.