Hands up - I hardly ever reach for them when cutting/grinding (not that I do that much). I will now - so thanks for the reality check 👍

Glad you’re sorted, messing about with eyes not good, 3-4 weeks ago I was derusting a piece of steel to make a bracket for my vacuum bottle , I used brick acid (concentrated hydrocloric acid) , I wore my safety specs, cleaned up perfect in 2...

Just a note to say..... Watch your peepers!!.... I am 49 and have lived a long life and spent many hours grinding/welding etc......all self taught and whilst aware of the dangers of the spinning discs of woe, never really given a stuff as nowt...

It’s in. It works. (Music sounds bloody awesome!)

Got this far with the CarPlay screen… 6mm ply glued in to give some structure to the plastic speaker cover, as well as a rigid base to secure to (ignore the scribbles on the wood). Wires are down to fuse box and power is a female cigarette...

Yes, but the hand brake is small shoes within an inner drum (think yours is an early model, right? Not electronic)

Wheel off, and there is a plastic cap on the face of the drum. Prise that off and adjuster can be seen/moved with a screwdriver (the adjuster is on a horizontal plane level with the hub nut). Handbrake cable adjuster can be got to via the coin...

Shame that her partner is hiding in france, rather than being there with her and for her.

Well been busy replacing front end entire running gear and recon wheels Replaced the following both sides front Track control arm and gaiter Track rod end Shock and top mount Spring Wishbone Ball joint Wheel bearing Steering knuckle Abs sensor...

Got it today not had time for a good look around but Handbrake is completely stuck ! two tyres have been slashed The aerial is snapped only one key with no fob ☹️one parking sensor is not clicking The mirrors are not folding the temp is...

Well, if nothing else, at least there’ll be something to keep us all busy at the meet up…

Sadly that's where most new Defenders are parked.

Yes KpA. LP generally stays at same value (unless the pump is knackered). HP should be around 28000 at tickover, but rises to over 100000 at high engine load & revs. Plenty of KPA to PSI or BAR converters online, so just let us know what your...

IIRC, LP should be around 370/380 HP around 28000 Don’t ask me what the units are - I forget, though KpA rings a bell ! Edit - others that know exactly will be along shortly…