No - you can just undo the clamps holding them onto the subframe. You can get the bushes on/off with the bar in place. Before that, you might be able to find the source of your 'knock' by just prying around with a crow bar...

If it's only on bumps, then likely not the driveshaft. I'd look at the top mounts and the ARB bushes... If you do have to replace the mounts - try to buy genuine LR top mounts. I recently used new borg & beck mounts on my F2, but one gave a...

You can look up the exact part number you need here... https://parts.jaguarlandroverclassic.com/land-rover-freelander-parts/ Did you ever get Pscan or similar on it to check the sensors, as advised previously?

Range anxiety is not an issue for normal EV's which have a better range and can fast charge at 100kW or higher. I could drive to Dublin and home again in my MG5 with nothing more than a 10 or 15 minute breakfast or lunch stop. Many EV's like...

I've now found a YT video showing exactly the process of upgrading mirrors..... I didn't even realise the ribbed ones don't even fold back, so modifying the newer ones looks like the way to go.

Does it ‘knock’ when turning, or when going over bumps?

Got the injectors out today. 1,3 & 4 popped out fairly easily with a flat bar on the plastic cover to support my pry-bar. Number-2 needed my slide hammer pictured above, but eventually came out. Took all the tips off, and cleaned them out so...

Aside from the few sensors mentioned, you really need to get the codes/live data - you can throw parts at it if you like, but really you need to diagnose the issue. Get it on a reader and check the fuel pressure on the low side and the high side...

Sue will definitely have VCU’s and IRD’s, along with diffs or whatever else you want to get if you choose to replace. They’ll all be either new parts or recon’d correctly, but like I say, they won’t be cheap. They replaced my VCU and rear diff...

That is how I rebuilt my IRD. I wasn't even keen to actually remove it, but I have an inspection pit in my garage which made the job so much easier. Having done it and put it back together again, I'm much more confident to take on other jobs...

I looked at this site briefly, but the name sounded similar to one in the scam warning threads. I'll give Sue a ring. Cheers!

And after all that…