Do you still have the old drive shaft? When you get the one in question off, and the new one - compare to the old one. It appears there are some being distributed that are not the exact same dimensions - they are a few mm difference in some...

If it is driveshaft then putting more power through it would fit the problem.

Update; Given that I have not touched the hub (appreciate it ‘could’ be damaged), and there is no noticeable wobble when rocking the wheel left/right or up/down, I’m ruling that out at present. Given that I’ve also double-checked the struts and...

by the way, I bought a double DIN cage and a Freelander 1 adapter, but this didn't work well. It resulted in the headunit sticking out of the dash by about 14mm too much. What did work was drawing around the adapter onto a piece of scrap washing...

Diff rubbing noise is more likely the mounts. Never heard a diff making a rubbing noise . . . . usually it's a whine.

It’s got me, as if it were the driveshaft or the hub, I would have expected the judder/wobble to be felt under all conditions (?), but I’m only getting it on hard acceleration, when the weight is transferred off the front. Once the weight...

It's been known for aftermarket CV joints to stiffen under acceleration, which can cause a judder.

Got the go-pro on the n/a wheel this morning. Doesn’t give much away really, other than the new strut ‘looks’ like it’s doing what it should be doing, and I can;t see anything untoward or loose. So pointing towards the new driveshaft being...

The guy doing the alignment mentioned it ‘might’ be that. Another fitter I know (who built the struts up for me) said it was possible, but unlikely - he’d only known of 1 bad shaft out the box. Also possibly the hub. I’m just regrouping my...

So my freebie is going up for sale. It's been my daily commuter for a couple years now and been great fun. Unfortunately, it's coming up for MOT and I don't reckon it will make it through. If I could take it off the road for a month I reckon I...

@andyfreelandy @kernowsvenski

A juddery nightmare. Hope you can get it sorted soon.