Your a machine too 🤙

And in between all of the landy stuff I managed to give the bike a service before the trip

Rear wheel arches strengthened with formed inner ali sections panel bonded into place, few other repair sections fitted. New inner wheel arches bonded and rivited along with new floor and rear cross section all bonded rivited and bolted using 5mm...

Remove the 2 screws & replace the O ring… Yep I know how much diesel they loose as it’s happened to me. (Think I turned the o ring over to get me home) Nothing will fall out

New 1.6mm ali inner wing liners cut to shape and ready to be panel bonded and rivited over the original wings to give a smooth as new finish to the inside of the tub, also bonded 2mm sheet to the original floor here it is with some weight on it...

I did pal. Actually fitted new ones as I replaced both doors with new ones. The old doors were rotted out. I just wonder if the heater matrix was not of best quality and was not doing the heat exchanging effect very good. Checked every part of...

They still should be quite warm, did you check the door seals etc ?

hahaha oh dear! So frustrating - I hope you continue to keep yourself warm! I may have to get myself one of those sleeping bag suit for my travels :p Genuinely did not realise this was so common, wow!!

Genuine door seals and good door alignment helps. That defender draught right on the hip and kidney is horrible. My 300tdi disco is fine after first couple miles 😉

Naw...my DNA is Rhodesian and does not like coldness...

I think the inbreeding effects the ability to feel the cold.

For Rad Muff read feed sack ;)

I did pal,rebuilt the old beast which i finished last year. Just done the head gasket and gave the block a good flush,radiator too and new heater matrix and bled the system as per manual and its still pretty poor,its a bugger. Heater box was...

Maybe you can search for the thread that helps point you to re-furb your heater box and flushing the heater matrix ...

Yeah, mobile cold store if you ask me! I’ve got bits of soundproofing/lagging everywhere. Tried every trick in the book to get the beast to warm up(300 tdi 90). Warm air just demists the window…just🤬. I made my peace with the green monster and...

As above. Try paintman panels. Great quality, only place I’ll go now. 👍