Sadly the pin layout isn't on there but the name is Omron and it is A G2RL-1A-E 24VDC 2047Y1 16A/250V-/AC1. I never knew you could get data sheets, so I'll have a poke around and see if I can find it/one.
So Ta for that!:):):)
I like the thinking behind this.
Mr. Google AI says the following....
For a typical BMC/A-Series engine rebuild, valve stem oil seals are often fitted to the inlet valves only, not all eight valves, as the exhaust valve side has positive...
On my classic triumph engines I like to put seals on the inlet valves only (none at all were fitted back in the day). The accepted theory being, this stops oil (and air) being sucked down the valve guide into the combustion chamber on the...
Today's mission has been accomplished. Front passenger side nuts n bolts on the suspension assembly wire brushed, sprayed with penetrating stuff, and caked on brake dust on the wheel rim cleaned off (to a basic standard). Two new front shocks on...
I won't lie, after watching it, i think i want one too! The problem is, the only 'spare' body i have is a disco. I don't think it would look as good as with a Series body on top π€£
Could smell pee out the back ferra few days. Fort nowt ovvit. Then realised it were closerer to me kitchen door. Then fort it could be the pipe me nayber built over. Each day finking some more about it when picking up the smell. Me nayber ain't a...
Look on top ov the relay it may show the pin layout for the contacts and the coil. Normally has the manufacturerer and part number so yer can look up the datasheet.
There is a Series near me, bloke who owns it is having his house 'buildered', vehicle is in a very sorry state, parked at the kerb, filled with junk ... heartbreaking ...
He prolly thinks it's worth a 'fortune' ...
My Dad nicknamed my French ex "Mme Chaudlait". I don't think she ever knew this. But....
After he died I discovered from his diaries that he and she had kept in touch and seen one another for a long time long after the divorce. So weird!