They wos repeats

So sorry to hear all this.:(:( Commiserations, mate.

Yer but using the mitre saw means getting the flipping thing out, finding a safe place to put it, getting an extension lead etc etc. I agree it does make great cuts but......... So you ain't a fan of the jack saw then? Fact is, if I am moving...

Morning All. :D Another blustery sunny day ATM. :) Have a great day.:D

Congrats! :D

Well, Been busy today, lots of stuff for W's gardening, putting together a tin raised bed that she has had in the poly tunnel in its box for about 5 years among other things. But tomoz we will be celebrating 26 yrs married. A day early as the...

I suspect that this might have been a bit of "preaching to the choir". Anyone who has spent any time on the business end of a handsaw to build anything significant knows this approach. The other thing you didn't remind us was "let the saw do...

Eye didnt think yer were older than 80.

Humping aye :vb-biggrin::vb-biggrin:

The old gal had another procedure today. Wifey went there at 5PM to find that the old'un had only been carted off to theatre 10 mins earlier. At 8PM she called to be told that her Ma was back on the ward but not yet fully with it (is she ever?)...

Kev's tip of the day..... Chip hand saw on to the back of the bench. Place timber on mitre saw adjust angle you want, hold in place pull trigger & TAA DAAA. 🤣 🤣

Who said filthy was about dirt..? :vb-eyebrows:

I object to that. I'll have you know I just had a bath and it's not even summer yet. Although I couldn't see the bottom of the bath when I got out, it was a bit cloudy. Maybe next time I'll have the first bath instead of the oinker. 😁

Weather is filthier than a tratterer down ere. Plenty rainyblow. Funny but it seems regular here this time of year, just after swmbo's peonies flower. They gets battered.

What about fitting a (removable) tank onto the truck. And a bit of hose to connect it to the caravan? Then you could fill it up and no humping it back to the caravan.

@landowner Search Jacksons leisure They have the fiamma tanks and pumps. Also all the water fill points. I have the fiamma tank

Have a roll along but it's heavy to work with when full, plus lifting it on and off the truck when going to fill it etc, I take two 25 ltr plastic drums as well

Water tank… fitted to boats /campers have a large opening in the top. Put a vent valve in it & you can back fill these. Have 1 in the horse lotry. Cap is big enough to get hands in to put fittings into the side of the tank. Off for a search for you…

Moomins are 80 years old. Well 80 years since their first story was published. Top telly when eye were a nipper. https://www.moomin.com/en/moomin80/

Wharrabout the Roly ones ?

Afternoon Showers here and cool I'm researching water tanks to go under the caravan, fed up with humping water containers about I got some square tubing to go across the chassis for the tank/tanks to sit on (fill em up on site) Shovelled half a...

G'day all. Bin "taps aff" yessdi pm and today more or less so far. Bin workin int polytunnel so got extra sweaty. Forgot how hard it is for me to work at ground level. After a while, and not a very long while, either my knees or my back, or both...

Ahhhhh.... there is a page visible in Nanocom "Security" pages that tells you whether your BeCM is LOCKED or UNLOCKED. By all means go look at it but whatever you do, do NOT try to change that setting. If it says your BeCM is "Locked" then you...

Missed that :). J

Of that I am not sure. It is difficult to know what happens. Normally once you connect to becm there is the diagnostics mode on the dash. That’s not the case now, everything that happens after that I cannot be sure about if it is truly done e.g...

OK, with the RF memory cleared try pressing and holding the lock button on the fob while physically locking the door with the key; and holding the unlock button while physically unlocking the door. Then try the key in the ignition and starting.

OK, you cleared the RF memory and the fobs (both) still are not seen by the car and the doors don't lock/unlock?

I also cleared the rf memory thinking it would work after that. I guess my patience will be tested.

Clear the RF memory mate!

I verified also continuity between the rf receiver and the becm. Everything is ok. I do have 2 fobs but i get the same response, nothing 😤