• brianp38dse
    brianp38dse replied to the thread water pump broken bolt.
    Rangeroller DT is good with bolts and stud extractors :vb-biggrin:
    May 21, 2025
  • brianp38dse
    brianp38dse replied to the thread P38A Back again, Newbie P38.
    Wandering steering can be the radius are bushes, they should sit in the center of the axle mount if you can move them sideways with a bar they are shot.
    May 21, 2025
  • brianp38dse
    brianp38dse reacted to BDC's post in the thread P38 dse engine disabled with Like Like.
    Yes that was one of the 1st things I did. I did not mention it but I actually have an extra box to avoid rf noise from nearby sources from Marty.
    May 20, 2025
  • brianp38dse
    brianp38dse replied to the thread P38 dse engine disabled.
    Have you tried using the key fob next to the rear window to the right hand side of the tail gate as the ariel for the RF unit may be disconnected to stop battery drain.
    May 20, 2025
  • brianp38dse
    brianp38dse reacted to pwood999's post in the thread P38 2.5 low on power, can't reach max rpm with Like Like.
    But beware the license expiry. Quite a few reviews on amazon saying it's cheaper to buy a new one than renew the license in the App !!
    May 19, 2025
  • brianp38dse
    brianp38dse replied to the thread P38A Mystery wiring? Cd changer?.
    Trailer wiring at a guess,
    May 19, 2025
  • brianp38dse
    brianp38dse replied to the thread P38A Complete failure of window regulator and mirror (switch pack).
    12.15v is very under 12.4 is considered a dead battery what are you getting at the battery.
    May 18, 2025
  • brianp38dse
    brianp38dse reacted to Francesco M.'s post in the thread P38A The arrival of a P38 with Like Like.
    finally here we are! not yet 100% but in the meantime it's on the road!! now I've disconnected the air conditioning compressor because it started to make noise, when I have time I'll disassemble it, the fabric of the headliner still needs to be...
    May 15, 2025
  • brianp38dse
    brianp38dse reacted to RangeRoller dt's post in the thread What did you do with your Range Rover today with Like Like.
    May 13, 2025
  • brianp38dse
    brianp38dse replied to the thread If you start feeling irregular vibration that comes and goes on P38, it could be the EAS compressor!.
    Dont forget the dished washers on the pump mounts go a certain way they should dish )( that way not (). and whey only need to be nipped up not screwed down tight
    May 12, 2025
  • brianp38dse
    brianp38dse reacted to Blob's post in the thread What did you do with your Range Rover today with Like Like.
    In a bid to reduce my road tax and congestion charging bills, I've cleverly disguised the car as part of the Japanese Imperial Navy. Does anyone know how you get the diplomatic plates? eBay? Doesn't need to have the D dropped, I'm not that...
    May 12, 2025
  • brianp38dse
    brianp38dse reacted to P38Seb's post in the thread What did you do with your Range Rover today with Like Like.
    Threw the tent on the roof and ventured out to the north of Dartmoor for the night.
    May 11, 2025
  • brianp38dse
    brianp38dse reacted to RangeRoller dt's post in the thread P38A Injector seals ?? with Like Like.
    I still have that. Took it oft before they collected the bus
    May 11, 2025
  • brianp38dse
    brianp38dse reacted to mozz smith's post in the thread MOZZ IS VISITING , HELLO EVERYONE with Like Like.
    😇 cheers Range Roller, it's very nice of all the lads to say hello and has made my day . Everybody seems to be still involved in helping each other out, which was the reason it was all set up originally and after all this time ids as strong as...
    May 11, 2025
  • brianp38dse
    brianp38dse reacted to RangeRoller dt's post in the thread MOZZ IS VISITING , HELLO EVERYONE with Like Like.
    EXACTLY WHY SEEING YOU HERE HAS BRIGHTENED UP ALL OUR DAYS 👍
    May 11, 2025
  • brianp38dse
    brianp38dse reacted to Pug957's post in the thread L322 YET ANOTHER LCM ISSUE with Haha Haha.
    I bet the driver was getting some cake
    May 11, 2025
  • brianp38dse
    brianp38dse replied to the thread P38A Injector seals ??.
    Was it not the battery clamp from that rascally Tomcatalan.
    May 11, 2025
  • brianp38dse
    brianp38dse replied to the thread L322 YET ANOTHER LCM ISSUE.
    That poor train keeps going through the buffers :vb-biggrin:
    May 10, 2025
  • brianp38dse
    brianp38dse replied to the thread MOZZ IS VISITING , HELLO EVERYONE.
    HI MOZZ GOOD TO SEE YOUR STILL AROUND :) UNFORTUNATELY IF YOU MISSED IT WE LOST DOPEY JUST BEFORE CHRISTMAS AFTER A SHORT ILLNESS:(
    May 10, 2025
  • brianp38dse
    brianp38dse replied to the thread What did you do with your Range Rover today.
    You mean you didnt have tea and cake whilst doing the work, you are slacking its a given when working on Rangerovers :vb-biggrin:
    May 10, 2025
  • brianp38dse
    brianp38dse replied to the thread What did you do with your Range Rover today.
    dont forget the tea and cake :vb-biggrin: :vb-tup:
    May 10, 2025
  • brianp38dse
    brianp38dse replied to the thread L322 YET ANOTHER LCM ISSUE.
    Owww custard creams now were talking :vb-biggrin:
    May 10, 2025
  • brianp38dse
    brianp38dse reacted to Mark Piercy's post in the thread L322 YET ANOTHER LCM ISSUE with Like Like.
    Vanilla slices🤤
    May 10, 2025
  • brianp38dse
    brianp38dse replied to the thread L322 YET ANOTHER LCM ISSUE.
    I heard Walnut cake mentioned were is this said cake as iam hungry now :vb-biggrin: always room for cake
    May 10, 2025
  • brianp38dse
    brianp38dse reacted to cutlerr's post in the thread M57 classic conversion with Love Love.
    Quick update
    May 5, 2025
  • brianp38dse
    brianp38dse reacted to kevstar's post in the thread I would just like to say with Love Love.
    May 2, 2025
  • brianp38dse
    brianp38dse replied to the thread P38 2.5 low on power, can't reach max rpm.
    Just look that one up very good price for what it does and more usefull than Nanocom if you have other motors :)
    Apr 29, 2025
  • brianp38dse
    brianp38dse replied to the thread P38 2.5 low on power, can't reach max rpm.
    Sounds about right , what reader are you using as the doozel is not obd compliant very few will read a p38 doozel
    Apr 29, 2025
Show older items