It’s what she came with when I bought it, thanks for info il have look at them 👌🏻

Why do you have HD springs anyway unless you carry a lot of extra weight. Son has Britpart stock rated springs, cellular dynamic shocks on the back and TF shocks on the front which are still fine over 10 years later.

The downside is that you are going to have to build one now.

Well just got home and met some very friendly people! What a great crowd, makes my 90 look and feel slow now! Drove the course at the end of the day with my boy in one of the vehicles, those v8's on song make the hair stand up on your neck!!!

Faulty BBUS?

Horn? Old fashioned whistling kettle?

Second this. I have done it in my 90 with 750s on wolf rims, So only slightly smaller. Stacked one on top of each other. But they do wobble around a disconcerting amount while driving! I can also confirm as an fyi to anyone else that five...

You'll be able to fit them into a 90. It's tight but they'll fit, just stack them upright

Four wheels Wolf wheels fitted with 255 85 r16 tyres and a bare wheel. Should we take a 90 or D2 to collect them, which will be the better option? Had four steel wheels with 750x16s in the Focus once, that was a tight squeeze!

Did you get it working?

£15, it's impossible to tell with the lack of information.

Don't think you will get a new head, 2nd hand or reconditioned if available. Puff of black smoke is pretty normal on start up it would seem.

Oh yes, I know a few accident investigators. In the worst case, a fatal accident, they will be all over your vehicle like a rash. Then comes the insurance assessors, who would like to know why you never told them of the modifications.

I find that with a lot of forums, its better to google it, rather than use the in build search box.....

If I remember correctly it depends which track rod you have which dictates which track rod ends you should use.

I Googled it 🤣

https://www.landyzone.co.uk/land-rover/radius-arms.157737/

The downside being you take them off and have an accident which is investigated then you will be in deep do do. D2 never came without them fitted.

Funny isn't it, I fitted Britpart oem rear bushes to my son's Ninety 5 years ago and are fine.

Thank you., don't suppose you know what the part number for the 4mm glass channel is ?

Started fitting a new air con fan motor on my son's Td5. Bit of a faff as he has front spot lamps and all the fan housing screws snapped. Just soldered the wires today and will refit the spot lights once I have painted the mounting bar. Oh...

I am not convinced, maybe you would be better off paying someone.

I have never heard of such a thing, what does it do? Edit: Blimey how much!

Welcome Richard Willetts. Sure someone might be able to help you better if you said what year vehicle you have. Sounds too new for me.

We had a positive earth 2a which we changed to negative earth. The original sender unit carried on working normally.

Is the felt glass channel in one or two section? Is the correct part number MUC4071 for a 4mm window? Thanks in advance.

What a crying shame, must be terrible. Stick the reg plate up, just incase it's still on the correct plates. Hope you get it back.

It isn't much work, you would do well to find a video on YouTube. Wheel off, release track rod end, place a jack under the swivel for support, undo top two bolts, remove shim, do up bolts and check. You will probably need to experiment with...

CPS maybe for engine light, you need a code reader to verify the code. Squealing noise could be related to anything attached to the auxiliary belt. Diesel pump? Do you mean the fuel pump in the tank?

Not strictly true as the Brotpart cellular dynamics and springs are doing well on my son's Ninety, the same shocks are doing well on his D2. Failed miserably on my 90 as mentioned. Brake calipers and discs doing well on the D2. To be fair in...