https://www.ebay.co.uk/itm/235127935875 Buy the right one as they are not all the same. If you are confident the white wire is at fault could you not energies the relay with 12v just to test it? Then run a replacement wire from the relevant...

I am no electrician but sounds like, from your description you should get a live, white, when you turn the ignition to crank position. This energies the relay, circuit made by the earth wire, and let's current flow to the starter. Warning: I...

https://lrd-track.co.uk/products/fuse-box-to-battery-live-cable-relocation-loom If you are changing it for no reason whatsoever then maybe consider buying that, maybe.

Richards chassis I think. Reuse what you can as many aftermarket parts are poor.

Done.

Coil?

It's a Defender, that's for sure. I will guess at a TD5.

It can't be your last picture as that suggests you live cable goes straight to earth.

It's on the bottom of the pump in the plastic housing. If you have oil in the ecu then change the injector wire loom.

Looks tidy, what are your plans with it?

Is there not a technical drawing with all the measurements in the workshop manual?

@Anaconda thank you for your speedy response (again!) - yes sorry 2004. But as the latch fits, I do wonder whether ordering a new set of 2004+ barrels would work. I cannot find a pre-2004 latch, unless I am being completely dim. Which would not...

2004 onwards according to Google.

https://www.lrparts.net/nahtddeftop-top-mounted-rear-gas-strut-nakatanenga-branded-for-land-rover-defender.html

I would be welding the chassis up first if I was you.

The more you pay and thicker it is the better it is, maybe! I don't think the difference between the makes is significant, more like we THINK it's better because it's more expensive so must be better. Up to you how much money you want to spend.

They all get stolen from a price of crap farmers truck to a blinged up Khan special. Puma bonnets and door as all the other ones have rusted out by now..

I just bought the cheapest sound deadening pads on Ebay at the time. It's also a good idea to cover the inside of the door trim in foam insulation

Well please let us all know how you get on.

No, not that I can see.

Drove past some of them mongs with a slurry tanker…it was empty but I cracked the valve open jus to let a bit of cow bum vapour out on my way past…I got the cants 🤣

I fitted a side exit exhaust, boost pin & turned up the pump for the maximum tanning effect for them nobs. 🤣 🤣

2+ shocks this used to happen to my son's Ninety when laning. Standard length shocks and it isn't a problem.

That's common.

If that's the case then why doesn't it loose pressure over night? If an injector leaks fuel would the oil level not go up?

Thanks all, Nice quick job, went in from underneath and some injector release spray soon had the movement released again. While I was under there I noticed that the return spring had worn away so nice new spring on as well. Now onto alternator...

Learning to drive must be a breeze nowadays. My Golf has an electric motor on each brake caliper to apply the handbrake. Sure it will be considerably more expensive to fix than adjusting or replacing a cable.

Spot welds, you can drill them out.

Do you mean the side cappings that you have already removed or the other section? The other section are welded on but you could rivet and glue them on, or even just glue them on.