But can you do that? The upper seatbelt mount may well be too far forward then for the belt to sit correctly.

Welcome What’s the scores on the doors George Dawes

Cut some length of your legs. They are cramped, I'm about 6ft and I can't find enough room to be comfortable.

I agree you are most likely right.

Don't know but you will need to clean it all off first anyway so might aswell seal up the camshaft cover. Mine produced quite a bit of oil when it leaked, depends on how long it's been leaking.

Doom monger!

I would clean all the oil off, pop the camshaft cover out and seal it back up, costs nothing almost. Then you can watch to see where the oil reappears.

You need to post a picture of the gap between front edge of the door and the a pillar. Also see how much play you have in the hinges to see if they need replacing also.

Your welcome to come along. I'll post up another thread next time I go out.

Maybe next time

I was tempted to come down in the F2, but have been doing some work on it lately, so wasn’t sure if it would be ready

Check for oil in the ecu plug and change the injector loom is as good as any place to start.

If it wasn’t a tdi I’d look like one of them dirty vegans!!!

I am sure if you Google the question you will find a company selling card board boxes.

AstroTurf?

Out in the edges of netheravon with flags flying.permissive acsess for work) Not in my normal 4x4 but hopefully won’t be getting stuck…

Yes I agree , I intend to use a 12v linear push pull solenoid , these can be of various power and speed rating , hence asking if anyone had used one , I will be producing a bracket for it and I'm sure it will take a couple of solenoids to get the...

I switch it off everyday.

I had that a couple of weeks back. Then it became inundated with adverts to the point of being almost unusable. Now it seems OK.

I have found you need to be quite slow when putting the Od in and out of gear. Keep us informed how you get on with fitting a solenoid.

Put in what comes out? Red is Dexron 3

Believe it or not I have only a couple on the phone. You will have to wait for some others when I get them off the camera. Just the two of us today, a first timer came along in a 200tdi 90, said he enjoyed the day and would come along again...

Hiya Funny enough I noticed that as well when I was looking for one It was the same when I finally bought my D3 as it was like a boat , then after I virtually rebuilt the suspension and got it perfect the difference was like night and day All...

I wouldn't change a seal which wasn't leaking.

To be fair I took a D4 for a test drive once, I didn't really like it much wallowed around too much for me. Mind you I do suffer from motion sickness a bit, not usually when I am driving myself though. So maybe springs are better. With regards to...

Hopefully they are the ones.

VPLCR0137

Land Rover dealer maybe?

You can also buy the complete Defender workshop manual as a download from JLR

https://parts.jaguarlandroverclassic.com/parts/index/hierarchy/id/3.55713/brand/land-rover/_gl/1%2Abfz9qm%2A_up%2AMQ..%2A_ga%2AMTI4MzkyNzk3OC4xNzQ0NDU3MTY2%2A_ga_6WEX61NFXZ%2AMTc0NDQ1NzE2NS4xLjAuMTc0NDQ1NzE2NS4wLjAuMTIyNzk2Njc5NA../