Removals01

Removals01

Active Member
Hi Guys the master mechanic is fitting my new cross member (bought from Pressbrake some time ago) and has discovered the rear wiring loom is shot to bits (basically been acting as an electric fire!) I have done some searches and am now totally confused.

Can we just replace this section of the loom? and if so which loom do I order?

Thanks in advance!
 
Can fix it with trailer bored wire, i did with one of my old trucks, all depends how you want it done either repaired or replaced,
 
cotton said:
Can fix it with trailer bored wire, i did with one of my old trucks, all depends how you want it done either repaired or replaced,
Click to expand...

Thanks that has been suggested elsewhere too and have done some more searches and it seems a chassis loom is only about £90 I suppose the most important thing is to find out what caused it to start with eh?
 
Yh it is a commen fix for landys lol, yh you will prob find the cause while changing the loom but deffo try and find cause 1st prob something silly like a chaffed wire
 
A common fix is to run replacement cable outside the chassis along the body,keeps it out of the way the next time chassis needs welding.I have used 7 core trailer cable just fine.
 
Doing the same with my build, melted the wires whilst cutting not haw to fix, luckily I still have enough spare to join using existing wire,
 
You must log in or register to reply here.

Similar threads

M
1985 90 Rear wiring
Replies
2
Views
1K
MelancholyDonkey
M
Skyisthelimit
Disco 1 1991 v8 fuel pump electrical wiring
2
Replies
31
Views
2K
Skyisthelimit
Skyisthelimit
Skyisthelimit
No impulse on Discovery 1 1991 model V8 3.5 right hand drive.
Replies
12
Views
835
classic kev
classic kev
dag019
Bulkhead Wiring Routing
Replies
8
Views
2K
Seaswood
Seaswood
Wagon Loon
Resto, Repairs, and adventures with 'Peggy' The 1997 90 Pick-Up
Replies
1
Views
1K
Wagon Loon
Wagon Loon