T

Truebrit

New Member

• Jun 15, 2019

• #1

have defender 90 1996. Just replaced all the wiper assemblies
Have problem with driver side wiper sweep. Hits windscreen rubber. When adjusted it sweep past to low any ideas

 

RangeRoller dt

Well-Sprung Member

• Jun 15, 2019

• #2

Have you got right size wiper blade on it?

Just a thought.

Welcome to Landyzone

 

T

Truebrit

New Member

• Jun 15, 2019

• #3

Yes have 13” fitted. It’s the stroke of wipe seems to over shoot one way. If you adjust it it over shoots the other way.ie the blade park position
Am thinking it should be a smaller blade on the driver side

 

RangeRoller dt

Well-Sprung Member

• Jun 15, 2019

• #4

Can’t recall what ones I had but sure one was smaller?

 

RangeRoller dt

Well-Sprung Member

• Jun 15, 2019

• #5

There is no ‘96 on the charts?!? Only ‘95 or ‘97.

All fronts are 11”’ apparently for those years

Unit you fitted dodgy perhaps or out of alignment slightly?

 

T

Truebrit

New Member

• Jun 15, 2019

• #6

To me. It would make sense as to the position on the wheelboxes. To have one shorter . As I say all has been replaced with new. Motor gearboxes and wipers

 

T

Truebrit

New Member

• Jun 15, 2019

• #7

Mine is a N reg defender 90. And 11” would make sense to fit. Will look at getting hold off 11” . Cheers for the info

 

Hippo

Lord Hippo

• Jun 23, 2019

• #8

Welcome to the forum

 

RangeRoller dt

Well-Sprung Member

• Jun 23, 2019

• #9

Try one 13” and the one you think smaller 11”.
I am damn sure my ‘98 Vreg had a smaller one

Had quite few ‘custom’ jobs (duct tape)