A

AntDB74

Member
Hello All

After a totally flat battery I charged the battery and got into the car to all the usual windows and sunroof not set alarms! I went through the usual procedure as listed in the handbook and carried out many times before. The rear windows set as expected however neither of the front windows would set nor the sunroof. Any ideas?

Cheers
Ant
 
1) Change your name I'm Ant, you can be Ant2 :D

2) Did you do it with all the doors shut, engine running??
 
AntDB74 said:
Yes doors shut engine running whilst driving

Ant2
Click to expand...
:D

Did you briefly pause at the bottom and then return to the top and hold the switch in the up position until the message said Window Set (about 3-4 seconds)??

Also try doing it while not driving, just engine running!
 
Saint.V8 said:
:D

Did you briefly pause at the bottom and then return to the top and hold the switch in the up position until the message said Window Set (about 3-4 seconds)??

Also try doing it while not driving, just engine running!
Click to expand...

Yes, did it the same way as always, tried not to pause for too long at the bottom and waited at the top!

Will give it a go whilst not driving
 
Sunroof needs to be motored to all positions open and all positions closed.
 
Think it should go fully open, fully closed, fully tilt, fully closed.....
 
You must log in or register to reply here.

Similar threads

MAF Diver
Disco 2 Nanocom/RAVE manual is wrong: adjusting windows after removing key and opening a door?
Replies
4
Views
443
MAF Diver
MAF Diver
Radar1946
P38A 12.5 volts and not enough to start engine.
2
Replies
23
Views
2K
Radar1946
Radar1946
JokerUK
Mongoose Pro problem
Replies
2
Views
911
Graculus
Graculus
L
XYZ switch and no front electric windows. Help!
Replies
18
Views
1K
sierrafery
sierrafery
Roverdrive
L322 L322 Battery strangeness
Replies
16
Views
1K
kermit_rr
kermit_rr