S

Stonesinboots

Active Member

• Feb 1, 2015

• #1

Hi, looking for some advice on where to run the 4 power cables
for the winch. I am thinking holes,with grommets in the front panel under the horn. I have a remote solenoid that i'am mounting on the inner wing in front of the servo.
Where do people fit the multiplug for the handset?
I have a remote control that I intended to use inside.
Thanks in advance.
John

 

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Events Planner

• Feb 1, 2015

• #2

How I fitted mine to my old Disco ..

Hard to see, but the square hole in the grille is for the winch freespool lever, top left of the grille is a small rocker switch to arm it. I then had a arm and in/out button on the dash with a separate wireless handset if I wanted as well.

The main wires came from the battery and were fed through 'natural' holes in the slam panel and radiator surround, with control wires using grommeted bulkhead holes already there!

 

S

Stonesinboots

Active Member

• Feb 1, 2015

• #3

Cheers Paul
thats a nice tidy install mate.

(dont know where the LookH in the title came from??)

 

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Events Planner

• Feb 1, 2015

• #4

Thanks .. the steering guard/winch plate could be yours for a small fee and delivery costs, and the bumper!! Make an offer ..

Have a look here ...
http://www.landyzone.co.uk/lz/f16/warn-winch-repair-thread-199771.html

I'll get a proper picture of the winch plate, it's had a couple of changes, if you're interested ..

 

S

Stonesinboots

Active Member

• Feb 1, 2015

• #5

Thanks for the offer, but I managed
to get a bumper, winch, steering guard
and yellow top battery for a bulk purchase price.

 

markSX

Active Member

• Feb 1, 2015

• #6

Paul D said:

Thanks .. the steering guard/winch plate could be yours for a small fee and delivery costs, and the bumper!! Make an offer ..

Have a look here ...
http://www.landyzone.co.uk/lz/f16/warn-winch-repair-thread-199771.html

I'll get a proper picture of the winch plate, it's had a couple of changes, if you're interested ..

Click to expand...

I'd be interested in any photos/info you can give on this instal.

 

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Events Planner

• Feb 1, 2015

• #7

markSX said:

I'd be interested in any photos/info you can give on this instal.

Click to expand...

It's all somewhere in the thread I posted ..

http://www.landyzone.co.uk/lz/f16/warn-winch-repair-thread-199771.html

 

dieseldog69

Well-Known Member

LZIR Despatch Agent

• Feb 1, 2015

• #8

Click the blog in my siggy and look in 2014 for the winch and bumper post

 

markSX

Active Member

• Feb 1, 2015

• #9

Food for thought.

I have the same steering guard as you, could the tray not have been fitted without removing the jacking points ?