F

Flashman

New Member

• May 10, 2014

• #1

Hi Guys,

Quick question as im in the middle of the job: Im fitting Britpart wide angle propshafts to my Defender 90 200 TDI.

Which way round does the front propstaft go? By that, does the sliding part go towards the gearbox or diff?

On the rear Im going to put it on the same way as the original, sliding part towards the gearbox but I cant remember which way round it goes on the front (i took em off weeks ago)

A swift answer would be much appreciated!

 

dizzytim

Active Member

• May 10, 2014

• #2

Slider to the gearbox

 

warrior

Well-Known Member

• May 10, 2014

• #3

Doesn't matter as you will be taking it off soon as it will have broken, I have since replaced my uj's with gkn ones and they have been good sofar

 

johnlad

Well-Known Member

• May 10, 2014

• #4

warrior said:

Doesn't matter as you will be taking it off soon as it will have broken, I have since replaced my uj's with gkn ones and they have been good sofar

Click to expand...

thats what I was gonna say, lol

 

jamesmartin

Well-Known Member

• May 10, 2014

• #5

doesnt matter in any case originally slide was at diff end ,later some where fitted at t/box end

 

L

lynall

Well-Known Member

Full Member

• May 10, 2014

• #6

Ive got britpart props on both my motors, they are just fine, their spare u/js on the other hand are utter ****e.
Ive always fitted slider to tfer box end, keeps it out of the clag