RiffRaffRevival
Member
Anyone able to shed some light... excuse the pun?
I have an '85 90 2.5 N/A...
Everything functions correctly on the passenger side circuit (side light, dipped beam and full beam), however selecting full beam causes the driver side dipped beam to drop off, leaving nothing illuminated other than the side light - how so?
I have 3 wires running to the lamp holder: BLUE/BLACK, BLUE/ORANGE and BLACK all of which appear to be in order and I've even tried bypassing the lamp holder (3-way connector), by connecting each wire directly to the corresponding 'tab' on the lamp, but the same thing occurs! How can everything operate correctly at dipped beam, yet drop-off when full beam is selected... I've tried 3 different lamps, to eliminate the possibility of a duff one!
I have an '85 90 2.5 N/A...
Everything functions correctly on the passenger side circuit (side light, dipped beam and full beam), however selecting full beam causes the driver side dipped beam to drop off, leaving nothing illuminated other than the side light - how so?
I have 3 wires running to the lamp holder: BLUE/BLACK, BLUE/ORANGE and BLACK all of which appear to be in order and I've even tried bypassing the lamp holder (3-way connector), by connecting each wire directly to the corresponding 'tab' on the lamp, but the same thing occurs! How can everything operate correctly at dipped beam, yet drop-off when full beam is selected... I've tried 3 different lamps, to eliminate the possibility of a duff one!