Hi I am looking for advise on lowered spring turrets. I am running standard length TF shocks, and I do not wish to swap to 2" longer varients due to cost. I like the handling of the TF shocks, allthough I know PC shocks are cheap they do not give the same handling as TF (given the choise I would go for ome....but I dont)
Regards the turrets though I cant deside weather to go for 1" lowered or 2" lowered, I am concerned that if I go for 2" lowered the shock can reach full compression and risk damaging the shock. I am using extended bump stops, allready and +2" springs, but I want to get a little more droop without sacrificing the road handling. What do people think 1" or 2". On the back I will run with a 1" lowered bracket as I beleive this is fine and wont allow the standard shock to bottom out with the extended bump stops in use. I notice most turrets are -2" though so someone must have oppinions about using these with standard shocks. Thanks for the tips, Jim

Disco 1 or 2?

disco 1 200tdi

anyone have any comments on weather I should get -1 or -2" shock turrets for my standard length shocks. My only concern is I do not want to be able to fully compress the shock risking damage on the -2" option, advice appreciated thanks Jim

personnally i would have measured first before fitting spring ,but since shocker bottoming out on compression is more of a problem than at full stroke fit 1 inch shorter turrets