Just found this elsewhere on this forum:

" Take the engine cover off, have a look at the rubber hose that leads from the right side of the rocker cover. It will travel down towards the induction pipe that goes from airbox to turbo. Disconnect at both ends, remove and check pipe for blockage, splits etc. Check the round plastic thing it enters for blocks, splits etc. Clean the whole thing with parrafin, dry and replace."

But it isnt:

breather.jpg


I had my Injectors reconditioned - that solved a few problems with lumpy running. (£144).
 
I have since been advised that the breather is the pipe coming from the Turret near Injector No3 ! If this is the case it was too obvious for me to notice..
 

Similar threads