taazzukcb

Active Member
Has taken me ages and I'm still only 50% through me shed, but have a list of some bits for sale. All open to offers!

Have plenty of pics but will post as requested as I have a lot!!!


• TD5 Vanaaken Performance Box - Great condition as it's been in the seat box. Comes with all wiring and joining connectors. The box is plugged in by an RS232 into the including piggy back wiring loom. Will suit pre-NNN and NNN alike (ran on my NNN TD5 until I got the new Turbo and map). Has run for thousands of miles on my standard TD5 without a single issue. Didn't even run a modified intercooler etc. Somewhere around 160Bhp I believe. Not sure where to price this ... - £150 ono

• TD5 Standard Turbo - Great condition. 90K miles. Turbine is solid and very clean - £160 ono

• TD5 Standard Exhaust Manifold - Great condition. 90K miles. Never warped and never pulled a stud. Studs came off nice and easy suggesting the manifold hasn't moved at all - £100 ono

• TD5 Standard Intercooler - Great condition. 90K miles. Fins are nice and clean. Very few marks or nocked fins but inevitably there are some - £50 ono

• High Mount Front Winch Bumper with A-Frame - Brand New ... Never Used. Been sat in my shed for months and moved around. Item is brand new but has a few scratches and marks from being moved around. Nothing that can effect it. Believe it is Galvanised under the Powder Coat ... Very nice item indeed - £130 Provisionally Sold

• 5x Bulldog 30mm Hubcentric Wheel Spacers - Used for a couple months. One came a little loose and has elongated the holes slightly, but when done up tight they sit down properly and central as per normal. The extra one is a Bulldog, but just doesn't have the stamp around the edge. Can include steel wheel nuts if required so 25x Nuts, again, few months running as I bought them new - £80 (no nuts), £95 (with 25x steel wheel nuts).

• 4x Pro Comp Extreme Lightweight Alloy Wheels with 265/75 BFG AT's - Great condition with minimal marks. In black, run a 0 offset, so with 265's on, they full the arch perfectly! BFG's have got a good amount of tread left and will have 1000's of miles left! I'm wanting to go back to steels and MT's! Comes with 2x Full sets of nuts. 1 Full set of brand new ones. Very very hard to get hold of. Only one location in America had the correct seat angle and thread/pitch/size etc - £600 ono

• Soft Front A-Bar with Hella Chromium Lights - Great condition. Comes with Hella Chromium lights and bracketry. Non-winch version. Needs a good clean as I've had greasy hands all over it. I actually like the look of this, but want to try and tubular bumper. Will include the original bumper if needed - £300 ono

• Calliper Sets
- 1x Pair Front Vented Callipers in great working condition with good pads - £40
- 1x Pair Front Vented Callipers, need a full rebuild - £20
- 1x Pair Rear Calipers off my 110 TD5, need full rebuild - £20

• Centre Seat - Good condition with frame. Frame could do with a touch up - £15

• Various Exhaust Sections
- 300Tdi 90 Rear Resonator - £10
- 300Tdi 90 Middle Silencer Removal *New* - £Given Away
- 300Tdi 90 Middle Silencer - £10
- TD5 Home made CAT Removal pipe - £10
- TD5 110 Middle Silencer - £10

• Soft Top Fume Curtain - Brand new. Been sat in the shed, Olive coloured - £50

• Air Filters
- 300Tdi MAHLE Brand New - £5
- 300Tdi Pipercross Performance Filter, 6 Months use - £20

• 300Tdi Water Temp Senders
- Green Ring - £3
- Black Ring - £3

• Old Style Brake Lights - New in box - £10

• Various Lights Removed from TD5 110 - All work. Most have bulbs which are believed to still work just fine. Front OSW Indicator and running light missing as they were broken - £15

• Rear Tub Corner Galvanised Capping - Brand new galvanised rear cappings (the ones the lights bolt through). Bought for the 90, no longer needed - £45


• Defender 110 Rear Half Shafts - £Sold
• Defender 90 Front Axle - £Sold
• 300Tdi Injectors - £Sold
• Black Soft Top Canvas - £Sold
• Sand Soft Top Canvas with Side Windows - £Sold
• Various Hood Sticks - £Sold
• Soft Top Door Surrounds - £Sold
• Soft Top Windscreen Bar - £Sold
• 4x Soft Top Windscreen Tension Clamps - £Sold
• HAWK Alarm/Immobiliser and Central Locking System - £Sold
• Milemarker H12 Hydraulic Winch - £Sold
• Gwyn Lewis Challenge Suspension - £Sold
• Bearmach Blue +2 Springs - £Sold


All for collection either from near Uttoxeter, Staffordshire or Trentham, Stoke-on-Trent.

If things need shipping, I will try me best. But obviously, buyer is to pay costs!
 
Last edited:
I believe it was this one (I will double check later when home, was a bright coloured box though, but feels very nicely made!):

Car Alarms Central Lock + Immobiliser + Dual Zone Ultrasonic + 4 DOOR CENTRAL LOCK KIT

I will double check when home. Looks like it's on offer to at the moment, so will drop my price down to £35 for now! Boxes are open, but all I've had a play with is one of the brackets when locating the actuators. However, it never got any further than that :p!
 
I believe it was this one (I will double check later when home, was a bright coloured box though, but feels very nicely made!):

Car Alarms Central Lock + Immobiliser + Dual Zone Ultrasonic + 4 DOOR CENTRAL LOCK KIT

I will double check when home. Looks like it's on offer to at the moment, so will drop my price down to £35 for now! Boxes are open, but all I've had a play with is one of the brackets when locating the actuators. However, it never got any further than that :p!

Ok, if it is that I will have it please.

When are you in Uttoxeter next?
 
Ok, if it is that I will have it please.

When are you in Uttoxeter next?

Will hold it for you until I get chance to check it (tonight).

I'm actually a bit further up the A50 towards Derby and pass Sudbury roundabout/Ashbourne A515 exit to and from work (Stoke) etc if that's easier as I notice you're ashbourne based.

Will let you ASAP on the model!
 
Will hold it for you until I get chance to check it (tonight).

I'm actually a bit further up the A50 towards Derby and pass Sudbury roundabout/Ashbourne A515 exit to and from work (Stoke) etc if that's easier as I notice you're ashbourne based.

Will let you ASAP on the model!

Ta.

I only said Uttox as my partner works at JCB.

I can probably meet you in Sudbury, no problem. I'm in Ashbourne most of the time at the moment!
 
I can be at either of those locations at any time really.

Shoot me a PM with when's best for you and we'll try and sort it!
 
The 110 half shafts, do you know if they would fit a 2005 TD5 110, as I'm sure they do, but I have read somewhere they are different, don't see how unless the splines are not the same, perhaps I should consult James Martin. What year are thru from? Are they from a Salisbury diff?
If James from Asbourne in Kent wants me to collect that alarm thing for him I can pick it up for him if those half shafts are what I need. Only I need a spare set for Morocco.
 
MrNasty, they're from a 54 Plate TD5 110 ;). Came out of my current vehicle. I bought them with new drive members only to discover it was only the original drive members that were worn (sat the new members on the old shafts and no play was evident) ... Not the shafts! Bunged in the new ones anyway as well ... they were new a shiny :p!

James is from Ashbourne up this way ;) ... He's had the alarm for a while now anyway so all sorted on that front. Kind offer non the less!


donk56, I'm assuming you mean the tubular winch bumper? Not the OEM bumper with Soft A-Bar?
 
ronsealdeath, I've had a few people ask about this. I'll open up the box and take pictures of it all ASAP. It's the 'Rear Challenge Kit' basically. But instead of the normal single hole rear shock mount, it has the adjustable 3-Way set so you can change the shock angle. Will get the pics ASAP!

the_wolf, Again, will grab a pic later. Everything is at home on my PC. Deleted them off me phone! Will get them ASAP. I have the pic from when I bought them if that'd help?
 

Similar threads