Landshandy

Active Member

• May 7, 2015

• #1

Hi guys,

Bought my disco 2 and the tyres are done, bought some 18" alloys and tyres but came to change them and my wheel lock key is broken, ordered one which arrived and it's too the wrong one. Anyone in the area have one I can borrow or recommend a garage with one. I have a trip to Cornwall on Saturday which I'm driving down everyone too so this messes plans up exceptionally

 

blue beasty

Leaks an prone to bits dropping off

• May 7, 2015

• #2

I've never owned anything modern enough to have locking wheel nuts but I believe most folk in your position drive a slightly too small socket on.

 

Landshandy

Active Member

• May 7, 2015

• #3

Hmmmmm the one in my bag which is broken is large, ordered one and it seems too small to go over

 

WURZAL THE LANDY

Active Member

• May 7, 2015

• #4

Check gumtree that's where I found a guy to do the wife's locking nuts after we broke the key tryring to get the nut off some ape used a gun to tighten them up when they changed the tyres he charged £10 a wheel. Some tyre garages will have the kit. I managed to use an irwins easy out on a breaker bar to remove mine when I found the po didn't give me the key. It depends on the style of lockin nut wife had 4 pins you line up, mine was a like a standard bolt with an odd shaped head.

 

WURZAL THE LANDY

Active Member

• May 7, 2015

• #5

http://m.screwfix.com/p/irwin-bolt-grip-nut-remover-set-5-pieces/96028

Here you go this is what I bought cheaper than getting someone to do it plus I got a cool new tool lol

 

Landshandy

Active Member

• May 8, 2015

• #6

Yeah mine was that too, cheers I'll have a look

 

Landshandy

Active Member

• May 8, 2015

• #7

All sorted, apparently the defender ones work although had to buy it from Land Rover garage so cost the price of family holiday

 

wattfield

AKA Dirk Diggler

• May 8, 2015

• #8

WURZAL THE LANDY said:

http://m.screwfix.com/p/irwin-bolt-grip-nut-remover-set-5-pieces/96028

Here you go this is what I bought cheaper than getting someone to do it plus I got a cool new tool lol

Click to expand...

One of my favourite tools, but are they big enough for a Landy wheel nut?

 

needmoretools

Active Member

• May 9, 2015

• #9

I used these I the past I get the numbers off them if needed ps they have a left handed thead.

 

Attachments

• 
  20150509_072334.jpg

  236.5 KB · Views: 227