ceffyn · Jul 12, 2017

Hi guys as the title says im after some advice on wheel bearings. Its come to my attention there are 2 kits one with a single seal and one with 2 seals! is there a way without taking apart my hub to find out what one i need. the vehicle in question is a discovery 1 300tdi on a R plate (1998) however the axle on there is from a discovery 1 V8 non ABS and not sure on what year it was.

also i notice there is OEM and Bearmach for both kits, should i get Bearmach or should i pay the extra and get OEM's

thanks in advance guys

Paul D · Jul 12, 2017

Timken ... accept no substitute.

ceffyn · Jul 12, 2017

Paul D said:
Timken ... accept no substitute.

sounds good but there are still 2 problems lol
1, im on a tight budget and yes i know i will have to change them again in the probable near future but at £20 i dont mind that for now.
2, i still dont know if i need single or double seal kit!

jamesmartin · Jul 12, 2017

ceffyn said:
Hi guys as the title says im after some advice on wheel bearings. Its come to my attention there are 2 kits one with a single seal and one with 2 seals! is there a way without taking apart my hub to find out what one i need. the vehicle in question is a discovery 1 300tdi on a R plate (1998) however the axle on there is from a discovery 1 V8 non ABS and not sure on what year it was.

also i notice there is OEM and Bearmach for both kits, should i get Bearmach or should i pay the extra and get OEM's

thanks in advance guys

single seal if thin drive members

neilly · Jul 12, 2017

ceffyn said:
future but at £20 i dont mind that for now.

You should be able to get a timken wheel bearing kit for £20, I have had a few fro my 90.

Cheers

ceffyn · Jul 12, 2017

jamesmartin said:
single seal if thin drive members

all i know at this point is the axle came off a V8 discovery without ABS. other than that i have no clue what to be looking for or what sizes anything in it are. was hoping there would be a easy way to tell without having to take it apart first given i cant use my VIN to find out as the axle that came off was a 300tdi 1998 with ABS.

ceffyn · Jul 12, 2017

neilly said:
You should be able to get a timken wheel bearing kit for £20, I have had a few fro my 90.

Cheers

when i find out if its a 1 or 2 seal kit i need i'll look into trying to get a timken kit then i figured they would be in the 40-60 range.

this is one of the many reasons i like to run things passed you guys

thanks as always to everyone replying

jamesmartin · Jul 12, 2017

ceffyn said:
all i know at this point is the axle came off a V8 discovery without ABS. other than that i have no clue what to be looking for or what sizes anything in it are. was hoping there would be a easy way to tell without having to take it apart first given i cant use my VIN to find out as the axle that came off was a 300tdi 1998 with ABS.

early 2 seal type
later single seal is thinner orprotrudes a lot less

ceffyn

Active Member

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

ceffyn

Active Member

jamesmartin

Well-Known Member

neilly

Well-Known Member

ceffyn

Active Member

ceffyn

Active Member

jamesmartin

Well-Known Member

Similar threads